HR4004D-4504D
38
6. - Putting into service
KN208JGB_C
Power harrow
The tractor must be fitted with lower link
stabilizers.
The power harrow can also be used with tractors
equipped with pto-shafts of 540 rpm and
750 rpm. The rotors are then driven at
intermediate speeds.
The 540 rpm pto-shaft must be used
occasionally and only for shallow work in
light conditions or for work which does not
require a tractor power exceeding 73kW
(100hp).
- The front axle load (1) must never, under
any circumstances, be less than 20% of the
tractor's unladen weight.
- Position the machine on level hard ground.
Tyre pressure
- Check tyre pressure (Left side = Right side).
Hitch pin parallelism
- Adjust tractor lift rods so that hitch pins are parallel
to the ground.
A
A
