6. - Putting into service
HR4004D-4504D
47
KN208JGB_C
Power harrow
By increasing the dimension L, the release effort
is reduced and vice versa.
- Secure hexagonal (6 faces) head screw (1) of
spring cartridge in a vice.
- Remove roll pin (2)
- Tighten or loosen nut (3).
- Reinstall roll pin (2).
- Grease all components.
- Reinstall the assembly and make sure that the
cams are positioned correctly (4):
• The angled faces of the cams must match the
angled slots in the bore of the housing.
- Reinstall the cam type cut-out clutch onto its shaft.
1
2
3
4
