4. - Safety
HR4004D-4504D
21
KN208JGB_C
Power harrow
PTO type
Diameter
X splines
A ±5
mm
(0.20’’)
1
35 mm (1.378’’)
6
85 mm (3.35’’)
2
36 mm (1.42’’)
8
85 mm (3.35’’)
3
35 mm (1.378’’)
21
85 mm (3.35’’)
4
45 mm (1.772’’)
20
100 mm (4.00’’)
5
44 mm (1.732’’)
6
100 mm (4.00’’)
- When uncoupling the machine, rest the PTO shaft
on the support specially provided, and replace
protective shield on the PTO stub of the tractor.
- Read and follow the instructions in the operator's
manual provided with the PTO shaft.
4.2.11 Precautions during manoeuvres
When moving the machine from the transport
position to the working position and vice versa,
make sure that nobody is within the machine
pivoting area.
4.2.12 Remote controlled components
- Danger of crushing and shearing can exist when
components are operated by hydraulic or
pneumatic controls. Keep away from these danger
zones.
4.2.13 Safety decals
Safety warning decals are placed in pictorial form on
various parts of the machine. They are there to warn
you of potential dangers and to tell you how to avoid
accidents.
- Always keep the safety decals clean and readable,
and replace them when they are worn, damaged,
missing or illegible.
