9. - Optional equipment
HR4004D-4504D
65
KN208JGB_C
Power harrow
9.2.1 Adjustment
Overhang
- Loosen bolts (1).
- Place lower link (2) in the required position.
- Reinstall and tighten screws (1).
- Adjust both sides to the same setting.
Distance between the lower links
- Change the position of the 4 R-clip (1) on bent
spacer (2) to alter the distance between the lower
links.
The bent part of spacer (2) can be positioned
upwards or downwards to avoid interference with
the additional machine.
- Tension stabilisation chains (3).
Height of the lower linkage arms
- Use chain tensioners (4) to adjust height of lower
links.
9.3
Hydraulic lift linkage
This equipment allows an additional machine to be
coupled.
This equipment is used to reduce the combination's
overhang when fitting an additional machine.
The equipment comprises the following component:
• A 3-point hydraulic attachment category 2.
2
1
4
1
3
4
2
