9. - Optional equipment
HR4004D-4504D
69
KN208JGB_C
Power harrow
Overhang:
The combination overhang can be reduced to
220 mm (8.7’’).
Position (a):
Factory setting.
Position (b):
Maximum overhang.
Position (c):
Minimum overhang
- Remove bolts (1).
-
Place hydraulic attachment frame (2) in the
required position.
- Reinstall bolts (1):
• (1) Torque: 25 daNm (184 lbf ft).
• (3) Torque: 17 daNm (125 lbf ft).
Removal
- When parking the power harrow / additional
machine unit, make sure that the additional
machine is lowered first.
- See section:
•
Optional equipment / Hydraulic lift
linkage / Putting the machine into work
position.
2
3
1
a
L
b
c
REPOSER LE SEMOIR AU SOL
LOWER SEEDER TO THE GROUND
SÄMASCHINE IMMER ABSENKEN
APPOGGIARE LA SEMINATRICE
AL SUOLO
DEJAR LA SEMBRADORA EN
EL SUELO
- AVANT L’ARRET DU MOTEUR
- AVANT TOUTE INTERVENTION
- AVANT LA DEPOSE DE L’ENSEMBLE
- BEFORE STOPPING TRACTOR ENGINE
- BEFORE ANY MAINTENANCE
- BEFORE REMOVING FROM TRACTOR
- VOR ABSTELLEN DES MOTORS
- VOR JEDER ARBEIT AM GERÄT
- VOR ABBAU DER MASCHINE
- PRIMA DI ARRESTARE IL MOTORE
- PRIMA DI QUALSIASI IMTERVENTO
- PRIMA DI DISTACCARE L’INSIEME
- ANTES DE LA PARADA DEL MOTOR
- ANTES DE TODA INTERVENCION
- ANTES DE LA DESCARGA DEL CONJUTO
