KUHN GMD350, Руководство оператора, Страница: 48 / 100

Disc mower
46
GMD350 - 350-FF
Instructions for work
$ Instructions for work
1. Putting the machine into work
position
From the transport position:
- Fully lift tractor lift linkage.
- Operate transport/work position cylinder to relieve
pressure on the transport lock.
- Pull the release cord until transport lock is released.
- Lower the mowing unit onto the ground using the
mowing unit lift cylinder.
Before placing the machine in working
position:
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the
person moves away.
When the following equipment is fitted:
Mechanical safety r Hydraulic pivot
When putting the machine in work position,
the cutter bar simultaneously lowers itself
and pivots frontwards.
In order to respect an angle X of 90° between
the tractor and the mowing unit in working
position, always use tractor double acting
valve to lower the mowing unit.