KUHN GMD350 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 100

KUHN GMD350 Скачать руководство пользователя страница 19

Safety

Disc mower

GMD350 - 350-FF

17

The protection covers help reducing risks of projections.

Therefore, make sure that all mower protection devices
are in place and good condition prior to using the
machine.

Regularly check the condition of the protection covers.

Immediatly replace any worn, damaged or missing
cover.

Precautions for machine use

After each use, check the cutting tools (discs, knives)

and their attachment hardware in accordance with the
instructions given in the present manual. Immediately
replace any worn, damaged or missing cutting tool or
element. To do this, use the tool outfit supplied with the
machine. For your safety, only use genuine parts !

Regularly check the condition of the protection covers.

Immediatly replace any worn, damaged or missing
cover. Before engaging the PTO, rest the cutterbar on
the ground. Make sure all the guards are in place. Keep
all persons and animals away from the danger zone.

Stay a safe distance from the machine when the cutting

tools are in movement.

Never work in reverse.

After disengaging the PTO drive, cuttings tools can

continue rotating for some time. Stay away from the
machine until all moving parts have come to a complete
standstill.

If the machine hits an obstacle, disengage the PTO

drive, stop the tractor engine, remove the ignition key
and wait for all moving parts to come to a complete
standstill. Check the entire machine for any damage
before resuming work.

«
...
17
18
19
20
21
...
»

Содержание GMD350





































































































Отзывы:

Нет отзывов