
Disc mower
38
GMD350 - 350-FF
Putting into service
-
On machine side, attach guard chain to the main frame.
Adjusting the machine
Frame height
Tractor fitted with a hydraulic position control function:
- Lower tractor lift linkage in order to engage lift stop (1)
in its housing.
- Lower tractor lift linkage until obtaining a distance of
450 mm (1’5’’) between the hitch pin pivot point and
the ground.
- Make sure that distance A equals at least 3 mm (0.1’’).
- Note the corresponding lever position in the tractor
cab.
Tractor not fitted with a hydraulic position control
function.
Immediately replace any worn or damaged
guard.
When optional equipment is used, follow specific
procedures mentioned in the related section:
- Chain stroke limiter
When the following equipment is fitted:
Mechanical safety r Hydraulic pivot
- Check that lock valve actuator (1) is no
longer engaged in cam (2).
1
2
Содержание GMD350
