manualshive.com logo in svg

KUHN GMD350, Руководство оператора, Страница: 45 / 100

Поделиться
Скачать
KUHN GMD350 Скачать руководство пользователя страница 45

Instructions for transport

Disc mower

GMD350 - 350-FF

43

$

Instructions for transport

1. Putting the machine into transport 

position

From the working position:

- (b) Release and lift side guard using 18mm box

spanner supplied with the machine.
• The guard locks automatically.

- Pull release cord until lift stop (1) is free.
- Fully lift tractor lift linkage ( The machine shoe inner

must no longer be in contact with the ground ).

Before placing the machine into transport
position:

Wait until the rotating parts have come to a
complete stop.

Check that nobody is located in the machine
pivoting area. If there is someone, make sure
the person moves away.

When the following equipment is fitted:

Mechanical safety release

- (a) Unlock and lift front guard using 18mm

box spanner supplied with the machine.

- The guard locks automatically.

When the following equipment is fitted:

Mechanical safety r Hydraulic pivot

When putting the machine into transport
position, the cutter bar lifts and pivots
rearwards simultaneously.

Содержание GMD350





































































































Отзывы:

Нет отзывов