KTI KGS-3120, Руководство по эксплуатации

Страница: 93 / 221

-93-
Access Profile Table
Access profiles allow you to establish criteria to determine whether or not the Switch will forward
packets based on the information contained in each packet
’
s header. These criteria can be specified on
a basis of VLAN, MAC address or IP address.
Creating an access profile is divided into two basic parts. The first is to specify which part or parts of
a frame the Switch will examine, such as the MAC source address or the IP destination address. The
second part is entering the criteria the Switch will use to determine what to do with the frame. The
entire process is described below in two parts.
To display the currently configured Access Profiles on the Switch, open the Configuration folder and
click on the Access Profile Table link. This will open the Access Profile Table window, as shown
below.
Access Profile Table window
To add an entry to the Access Profile Table window, click the [Add] button. This will open the Access
Profile Configuration window, as shown below. There are three Access Profile Configuration windows
- one for Ethernet (or MAC address-based) profile configuration, one for IP address-based profile
configuration, and one for Packet Content Mask-based profile configuration. You can Switch among
the three Access Profile Configuration windows by using the Type drop-down menu, and clicking on
the [Apply] button. The Access Profile Configuration window for Ethernet is shown below.
Access Profile Configuration (Ethernet) window