KTI KGS-3120, Руководство по эксплуатации

Страница: 102 / 221

-102-
The following parameters can be set:
Profile ID This is the identifier number for this profile set.
Mode * Select Permit to specify that the packets that match the access profile
are forwarded by the Switch, according to any additional rule added (see
below).
* Select Deny to specify that packets that do not match the access profile
are not forwarded by the Switch and will be filtered.
Access ID Type in a unique identifier number for this access. This value can be set
from 1 to 255.
Type Select profile based on Ethernet (MAC Address), IP address or packet
content mask. This will change the menu according to the requirements for
the type of profile.
* Select Ethernet to instruct the Switch to examine the layer 2 part of each
packet header.
* Select IP to instruct the Switch to examine the IP address in each
frame
’
s header.
* Select Packet Content Mask to specify a mask to hide the content of the
packet header.
Priority(0-7) Specify the priority tag, located in the packet header that will be identified
by the Switch.
Replace Dscp with(0-63) Select this option to instruct the Switch to replace the DSCP value (in a
packet that meets the selected criteria) with the value entered in the
adjacent field.
Vlan Name Allows the entry of a name for a previously configured VLAN.
Source IP Source IP Address - Enter an IP Address mask for the source IP address.
Destination IP Destination IP Address- Enter an IP Address mask for the destination IP
address.
Dscp(0-63) This field allows the user to enter a DSCP value in the space provided,
which will instruct the Switch to examine the DiffServ Code part of each
packet header and use this as the, or part of the criterion for forwarding.
The user may choose a value between 0 and 63.
Protocol This field allows the user to modify the protocol used to configure the
Access Rule Table window; depending on which protocol the user has
chosen in the Access Profile Table window.