manualshive.com logo in svg

KTI KGS-3120, Руководство по эксплуатации, Страница: 178 / 221

Поделиться
Скачать
KTI KGS-3120 Скачать руководство пользователя страница 178

-178-

used.

Priv-Protocol

None - Specifies that no authorization protocol is in use.

DES - Specifies that DES 56-bit encryption is in use based on the CBC-
DES (DES-56) standard.

SNMP View Table

 The SNMP View Table is used to assign views to community strings that define which MIB objects
can be accessed by a remote SNMP manager.

SNMP View Table window

To delete an existing SNMP View Table entry, click the [X] button listed under Delete on the far left
that corresponds to View Name. To create a new entry, click the [Add] button, a separate window will
appear.

SNMP View Table Configuration

SNMP View Table Configuration window

The SNMP Group created with this table maps SNMP users (identified in the SNMP User Table
window) to the views created in the previous window.

Содержание KGS-3120






























































































































































































































Отзывы:

Нет отзывов