KTI KGS-3120, Руководство по эксплуатации

Страница: 111 / 221

-111-
Note that this shortest path tree is only from the viewpoint of Router A. The cost of the link from
Router B to Router A, for instance is not important to constructing Router A’ s shortest path tree, but is
very important when Router B is constructing its shortest path tree.
Note also that directly connected networks are reached at a cost of 0, while other networks are
reached at the cost calculated in the shortest path tree.
Router A can now build its routing table using the network addresses and costs calculated in building
the above shortest path tree.
Areas and Border Routers
OSPF link-state updates are forwarded to other routers by flooding to all routers on the network.
OSPF uses the concept of areas to define where on the network routers that need to receive particular
link-state updates are located. This helps ensure that routing updates are not flooded throughout the
entire network and to reduce the amount of bandwidth consumed by updating the various router’ s
routing tables.
Areas establish boundaries beyond which link-state updates do not need to be flooded. So the ex-
change of link-state updates and the calculation of the shortest path tree are limited to the area that the
router is connected to.
Routers that have connections to more than one area are called Border Routers (BR). The Border
Routers have the responsibility of distributing necessary routing information and changes between
areas.
Areas are specific to the router interface. A router that has all of its interfaces in the same area is
called an Internal Router. A router that has interfaces in multiple areas is called a Border Router.
Routers that act as gateways to other networks (possibly using other routing protocols) are called
Autonomous System Border Routers (ASBRs).
Link-State Packets
There are different types of link-state packets, four are illustrated below:
• Router Link-State Updates - these describe a router’ s links to destinations within an area.
• Summary Link-State Updates - issued by Border Routers and describe links to networks outside
the area but within the Autonomous System (AS).
• Network Link-State Updates - issued by multi-access areas that have more than one attached
router. One router is elected as the Designated Router (DR) and this router issues the network
link-state updates describing every router on the segment.
• External Link-State Updates - issued by an Autonomous System Border Router and describes
routes to destinations outside the AS or a default route to the outside AS.
The format of these link-state updates is described in more detail below.
Router link-state updates are flooded to all routers in the current area. These updates describe the
destinations reachable through all of the router’ s interfaces.
Summary link-state updates are generated by Border Routers to distribute routing information about
other networks within the AS. Normally, all Summary link-state updates are forwarded to the back-
bone (area 0) and are then forwarded to all other areas in the network. Border Routers also have the