KTI KGS-3120, Руководство по эксплуатации

Страница: 130 / 221

-130-
Static/Default Route Settings
Static routes that have been previously configured appear in the Static/Default Route Settings table. To
add a new route, click on the [Add] button, a new window appears. To remove an existing route, click
the [X] button in the Delete column for the route you want to eliminate.
Static/Default Route Settings window
Use the Static/Default Route Settings - Add window to configure IP settings and Metric cost for the
new route.
Static/Default Route Settings - Add window
Configure the IP settings for the new static route and click the [Apply] button to create the static
route. The new route will appear in the previous window. To view the new route and any other static
routes configured for the Switch click the Show All Static/Default Route Entries link.
The following fields can be set:
IP Address <0.0.0.0> Allows the entry of an IP address that will be a static entry into the
Switch
’ s Routing Table.
Subnet Mask <0.0.0.0> Allows the entry of a subnet mask corresponding to the IP address above.
Gateway IP <0.0.0.0> Allows the entry of an IP address of a gateway for the IP address above.
Cost (1-65355) <1> Allows the entry of a routing protocol metric representing the number of
routers between the Switch and the IP address above.
Backup Status Specify the route as Primary or Backup. If a single IP route is used, it is
unnecessary to change this. Designate a backup route if an alternate route
is desired. A backup IP route is sometimes called a [floating static route].