KTI KGS-3120, Руководство по эксплуатации

Страница: 68 / 221

-68-
Forwarding & Filtering
The Switch allows permanent or static entries into the forwarding database (FDB). These FDB entries
are MAC addresses that will not age out. In addition, multicast forwarding may be customized to
conform to rules for the different ports by setting up multicast filter modes for each port.
Unicast Forwarding
Open the Forwarding & Filtering folder and click on the Unicast Forwarding link. This will open the
Setup Static Unicast Forwarding Table window, as shown below.
Setup Static Unicast Forwarding Table window
To add an entry, define the following parameters:
VLAN ID The VLAN ID number of the VLAN on which the above Unicast MAC
address resides.
MAC Address The MAC address to which packets will be statically forwarded. This
must be a unicast MAC address.
Allowed to Go to Unit Allows the designation of the module on which the above MAC address
resides.
Port Choose the port on which the MAC address resides. Selecting Port 0
means no ports are allowed.
Click on the [Add/Modify] button to add a unicast MAC address to the Switch
’
s forwarding table, or
to modify a previous entry.