KTI KGS-3120, Руководство по эксплуатации, Страница: 170 / 221

-170-
Enable Method Lists
This window is used to set up Method Lists to promote users with normal level privileges to Adminis-
trator level privileges using authentication methods on the Switch. Once a user acquires normal user
level privileges on the Switch, he or she must be authenticated by a method on the Switch to gain
administrator privileges on the Switch, which is defined by the Administrator. A maximum of eight
Enable Method Lists can be implemented on the Switch, one of which is a default Enable Method List.
This default Enable Method List cannot be deleted but can be configured.
The sequence of methods implemented in this command will affect the authentication result. For ex-
ample, if a user enters a sequence of methods like TACACS - XTACACS - Local Enable, the Switch
will send an authentication request to the first TACACS host in the server group. If no verification is
found, the Switch will send an authentication request to the second TACACS host in the server group
and so on, until the list is exhausted. At that point, the Switch will restart the same sequence with the
following protocol listed, XTACACS. If no authentication takes place using the XTACACS list, the
Local Enable password set in the Switch is used to authenticate the user.
Successful authentication using any of these methods will give the user an [Admin] privilege.
To set the Local Enable Password, see the next section, entitled Local Enable Pass-
word.
To view the following table, click Security > Access Authentication Control > Enable Method Lists:
Enable Method List Settings window
To delete an Enable Method List defined by the user, click the under the Delete heading corresponding
to the entry desired to be deleted. To modify an Enable Method List, click on its hyperlinked Enable
Method List Name. To configure a Method List, click the [Add] button.
Both actions will result in the same window to configure:
Enable Method List - Add window