KTI KGS-3120, Руководство по эксплуатации

Страница: 40 / 221

-40-
The Web interface is divided into six main folders: Configuration, Security, Management, Moni-
toring, Maintenance, and Single IP Management. This chapter describes all of the Configuration
sub-folders and windows except those found in the Layer 3 IP Networking sub-folder, which are
explained in the next chapter, Advanced Configuration.
Switch Information
The first page displayed upon logging in is the System Information (Basic Settings) window. This
window can be accessed at any time by clicking the [Switch Information] button in the Configuration
folder.
Switch Information (Basic Settings) window
This window displays general information about the Switch including its MAC Address, Hardware
Boot PROM and Firmware versions, and installed module information.
IP Address
Switch IP settings may initially be set using the console interface prior to connecting to it through the
Ethernet. If the Switch IP address has not yet been changed, read the Introduction of the CLI Refer-
ence or skip ahead to the end of this section for a quick description of how to use the console port and
CLI IP settings commands to establish IP settings for the Switch.
To change IP settings using the web manager you must access the Switch IP Settings window located
in the Configuration folder.
To configure the Switch
’ ’
’ ’
’
s IP address:
Open the Configuration folder and click the [IP Address] button. The web manager will display the