KTI KGS-3120, Руководство по эксплуатации, Страница: 34 / 221

-34-
Admin privileges may not be available to those with User privileges.
The following table summarizes the Admin and User privileges:
Management Admin User
Configuration Yes Read Only
Network Monitoring Yes Read Only
Community Strings and Trap Stations Yes Read Only
Update Firmware and Configuration Files Yes No
System Utilities Yes PING Only
Factory Reset Yes No
User Account Management Admin User
Add/Update/Delete User Accounts Yes No
View User Accounts Yes No
Admin and User Privileges
After establishing a User Account with Admin-level privileges, be sure to save the changes (see
below).
Save Changes
Changes made to the Switch
’
s configuration must be saved in order to retain them. Access the Save
Configuration window by clicking the [Save Changes] button located in the Maintenance folder.
Save Configuration window
The Switch has two levels of memory, normal RAM and non-volatile or NV-RAM. To save all the
changes made in the current session to the Switch
’
s flash memory, click the [Save Configuration]
button. Click the [OK] button in the new dialog box that appears to continue. When this is done, the
settings will be immediately applied to the Switching software in RAM, and will immediately take
effect. Once the Switch configuration settings have been saved to NV-RAM, they become the default
settings for the Switch. These settings will be used every time the Switch is rebooted.
Some settings, though, require you to restart the Switch before they will take effect. Restarting the
Switch erases all settings in RAM and reloads the stored settings from the NV-RAM. Thus, it is
necessary to save all setting changes to NV-RAM before rebooting the Switch.