KTI KGS-3120, Руководство по эксплуатации, Страница: 162 / 221

-162-
SSH User Authentication
The following windows are user to configure parameters for users attempting to access the Switch
through SSH. To access the following window, click Security > Secure Shell (SSH) > SSH User
Authentication.
Current Accounts window
In the example window above, no user account has been previously set using the User Accounts
window in the Management folder. A user account MUST be set in order to set the parameters for the
SSH user. To configure the parameters for the SSH user, click on the hyperlinked user name in the
window, which will reveal the following window.
SSH User window
The user may set the following parameters:
User Name Enter a username of no more than 15 characters to identify the SSH user. This
User Name must be a previously configured user account on the switch.
Auth. Mode The administrator may choose one of the following to set the authorization for
users attempting to access the switch:
Host Based - This parameter should be chosen if the administrator wishes to use
a remote SSH server for authentication purposes. Choosing this parameter
requires the user to input the following information to identify the SSH user.
Host Name - Enter an alphanumeric string of up to 31 characters identifying the
Remote SSH user.
Host IP - Enter the corresponding IP address of the SSH user.
Password - This parameter should be chosen if the user wishes to use an
administrator-defined password for authentication. Upon entry of this command,
the switch will prompt the user for a password, and then to retype the password
for confirmation.
Public Key - This parameter should be chosen if the user wishes to use the
public key on a SSH server for authentication.
None - Choose this parameter if no authentication is desired.
Host Name Enter an alphanumeric string of up to 31 characters identifying the remote SSH
user. This parameter is only used in conjunction with the Host Based choice in
the Auth. Mode.
Host IP Enter the corresponding IP address of the SSH user. This parameter is only used
in conjunction with the Host Based choice in the Auth. Mode.
Click [Apply] to implement changes made.