KSB Amacan P 1000-700, Инструкция по установке и эксплуатации

Страница: 33 / 132

5 Installation at Site
33 of 132
Amacan P
59-7
X
X
733.05
719.05
901
920
550
733.05
719.05
59-24
81-51
(185, 81-39)
3
5
0
-
4
5
0
*
)
5
0
*
*)
3
0
L
243
Fig. 21: Support rope with support, dimensions in mm
*) depending on the cable cross-section,
**) for 1 rope or 3 ropes = 30 mm
19. Clamp support 59-7 with guide plate 55-1 to the support rope (f).
20. Undo the screwed connection at the guide plate. Place clamp 81-39 of the guide
plate around the support rope.
21. Fasten plate 185 of the guide plate including the rod made of glass fibre
reinforced plastics to the clamp with hexagon head bolts 901, discs 550 and cap
nuts 920. Tighten the connection and secure it with Loctite 243.
(
ð Section 9.2, Page 94)
NOTE
The support must be clamped firmly to the support rope. If necessary, pad out
clamp 81-39.
22. Trim the spacer to fill the space between the two ferrules and accommodate the
support.
23. Guide the power and control cables along the support to the next cable clamp.
Pull them taught and secure them with the clamp.