KSB Amacan P 1000-700, Инструкция по установке и эксплуатации

Страница: 79 / 132

7 Servicing/Maintenance
79 of 132
Amacan P
Table 29: Key to the symbols and codes
Symbol Description
L
243
Always secure screwed connections marked with this symbol with
Loctite 243 .
FD
Always apply a liquid sealant (e.g. Hylomar SQ32M) to sealing surfaces
marked with this symbol.
1. Undo and remove screw plug 903.31 and joint ring 411.31.
2. Screw the testing device tightly into the G 1/2 plug thread.
3. Carry out the leak test with the values specified above.
ð The pressure must not drop during the test period.
ð If the pressure does drop, check the seals and screwed connections.
4. Repeat the leak test if required.
5. Remove the testing device.
DANGER
Screw plug leaking or missing
Explosion hazard!
Damage to the motor!
▷ Never start up a pump set without screw plug 903.31.
▷ Apply a thread-locking agent (Loctite 243) to screw plug 903.31.
6. Apply a thread-locking agent (Loctite 243) to screw plug 903.31.
7. Re-insert and tighten screw plug 903.31 with new joint ring 411.31.
7.7 Checking the electrical connection and motor
Once reassembly has been completed, carry out the steps described in
(
ð
Section 7.2.1, Page 51) and (
ð
Section 7.3.4, Page 55) .
7.8 Tightening torques
Table 30: Tightening torques [Nm] depending on thread, steel grade and property class
Steel grade - A2, A4 A2, A4 1.4410 1.4462
Property class 8.8 -50 -70 R
p0.2
≥ 530 N/mm
2
R
p0,2
≥ 450 N/mm
2
Thread
Minimum Rated torque Minimum Rated torque Minimum Rated torque Minimum Rated torque Minimum Rated torque
M4 3,0 3,4 1,0 1,1 2,1 2,4 2,5 2,8 2,1 2,4
M5 6,1 6,8 2,0 2,2 4,3 4,8 5,0 5,6 4,3 4,8
M6 10.3 11 3,4 3,7 7,2 8,0 8,5 9,5 7,2 8,0
M8 25 28 8,2 9,1 18 19 21 23 18 19
M10 49 55 16 18 35 38 41 45 35 38
M12 85 94 28 31 59 66 70 78 59 66
M14 134 149 44 49 94 105 111 124 94 105
M16 209 232 69 76 147 163 173 192 147 163
M20 408 453 134 149 287 319 338 375 287 319
M24 704 782 231 257 495 550 583 648 495 550
M27 1025 1139 36 374 721 801 849 944 721 801
M30 1403 1559 460 511 986 1096 1162 1291 986 1096
M33 1888 2098 619 688 1327 1475 1563 1737 1327 1475
M36 2445 2717 802 891 1719 1910 2025 2250 1719 1910