manualshive.com logo in svg

Korg TRITON Extreme, Руководство пользователя

Korg TRITON Extreme - мощный синтезатор с огромным набором звуков и возможностей. Для полного освоения инструмента важно иметь руководство пользователя. Скачайте бесплатное руководство на русском языке с manualshive.com. Узнайте все секреты работы с этим инновационным синтезатором.

Поделиться
Скачать
background image

190

0–2H: Export Smpl AIF/WAV

(Export Samples as AIFF/WAVE)

Sample data in Sample memory (RAM) that was recorded or 
edited in Sampling mode, or loaded in Media mode, can be 
exported (written) to media as an AIFF or WAVE format 
sample file.
This is valid only when the current directory is a DOS direc-
tory.

Normally, it is recommended that you use Save All or 
Save Sampling Data to save sample data in Korg format 
(.KSC, .KMP, .KSF). This will allow you to save the data 
in a way that preserves the state of the multisamples 
(and the samples that they use) as they exist in Sample 
memory (RAM).
Use “Export Smpl AIF/WAV” if you wish to use an 
AIFF or WAVE format compatible application on your 
computer to work with samples that were recorded or 
edited on the TRITON Extreme.

“Export Smpl AIF/WAV” does not export multisample 
files. The exported AIFF or WAVE format samples can 
be re-loaded, but if the sample number when saving is 
different than the sample number when loading, you 
may need to re-make certain settings, such as selecting 
the sample for each index of a multisample.
Furthermore, the following parameters set in Sampling 
mode are lost by “Export Smpl AIF/WAV.”

• Sample Name
• Loop Tune (Sampling 2–1c, “Loop Tune”)
• Reverse (Sampling 2–1c, “Rev”)
• +12 dB (Sampling 2–1c)

Samples that are handled by the TRITON Extreme as ste-
reo will be exported as two independent L and R files.

1

Select “Export Smpl AIF/WAV” to access the dialog box.

2

In “Format,” select either AIFF or WAVE as the file for-
mat for export.

3

Press the text edit button to move to the text dialog box, 
and specify the filename (

☞

OG p.115).

4

In “To,” specify the content that will be exported.
All Samples

: All samples will be exported.

It will not be possible to specify the filename. The file-
name will automatically be assigned as the first four 
characters (uppercase) of the sixteen-character sample 
name + the sample number.

Examples)

0000: NewSample_0000

→

NEWS0000.AIF

0001: C#3-EGuitar

→

C#3-0001.WAV

Samples in One MS

: All samples used by the selected 

multisample will be exported.
Only five characters of the filename can be specified. The 
five-character fi the index number (001–128) in 
the multisample will be assigned automatically.
Initially, the filename will automatically be set to the first 
five characters (uppercase) of the sixteen-character multi-
sample name.

Examples)

000: NewMS___000:
Sample selected for index 001 

→

 MS000001.AIF

Sample selected for index 002 

→

 MS000002.AIF

001: 108bpmDrLoop00:
Sample selected for index 001 

→

 MS001001.AIF

Sample selected for index 002 

→

 MS001002.AIF

When exporting All Samples or Samples in One MS, 
and all of the sample data does not fit on one volume of 
media, another dialog box will appear, directing you to 
specify the next media. (“If the data being saved does 
not fit on one volume of media” 

☞

p.187) However at 

this time if a single sample is larger than the capacity of 
the media, the sample cannot be exported. Either spec-
ify media with a larger capacity, or press Skip button to 
omit exporting that sample and proceed to exporting 
the next sample.

One Sample

: The single selected sample will be 

exported.
The filename will be the filename of the .AIF or .WAV file. 
Initially, the filename will automatically be set to the first 
four characters (uppercase) of the sixteen-character sam-
ple name + the sample number.

When exporting One Sample, it is not possible to 
export sample data that will not fit on one volume of 
media.

5

To export the data, press the OK button. To cancel with-
out exporting, press the Cancel button.

0–2I: Save Audio CD Track List

This command saves a track list that you created in the 
Make Audio CD page. The drive and directory locations that 
contain each WAVE file, and the names of the WAVE files 
will be saved.
This command is valid only when the current directory is a 
DOS directory.

1

Select “Save Audio CD Track List” to access the dialog 
box.

2

Use the text edit button to move to the text input dialog 
box, and specify the filename.
For example if you specify NEWFILE and save, NEW-
FILE.KCD will be saved to the media.

3

Press the OK button to save, or press the Cancel button 
to cancel without saving.

Содержание TRITON Extreme



































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TRITON Extreme

Xtrfy K5 Compact Manual preview
K5
Бренд: Xtrfy Страницы: 15
Palm 3245WW - Wireless Keyboard With Bluetooth... User Manual preview
3245WW - Wireless Keyboard With Bluetooth...
Бренд: Palm Страницы: 40
M-Audio Oxygen 25 Quick Start Manual preview
Oxygen 25
Бренд: M-Audio Страницы: 44
LifeFitness DISCOVER CONSOLE Operation Manual preview
DISCOVER CONSOLE
Бренд: LifeFitness Страницы: 79
Yamaha MOTIF XS6 Installation Manual preview
MOTIF XS6
Бренд: Yamaha Страницы: 4
Yamaha KX5 Owner'S Manual preview
KX5
Бренд: Yamaha Страницы: 8
Yamaha KX1 Owner'S Manual preview
KX1
Бренд: Yamaha Страницы: 8
Yamaha KBP-300 Owner'S Manual preview
KBP-300
Бренд: Yamaha Страницы: 8
Yamaha Internal XG Tone Generator Manual preview
Internal XG Tone Generator
Бренд: Yamaha Страницы: 13
Yamaha Modus R01 Owner'S Manual preview
Modus R01
Бренд: Yamaha Страницы: 16
Yamaha KX88 Service Manual preview
KX88
Бренд: Yamaha Страницы: 16
Yamaha HS-500 Manual preview
HS-500
Бренд: Yamaha Страницы: 27
Yamaha MR-1 Owner'S Manual preview
MR-1
Бренд: Yamaha Страницы: 38
Yamaha MOTIF ES6 Software Installation Manual preview
MOTIF ES6
Бренд: Yamaha Страницы: 35
Yamaha N-100 Owner'S Manual preview
N-100
Бренд: Yamaha Страницы: 42
Yamaha KX88 Authorized Product Manual preview
KX88
Бренд: Yamaha Страницы: 38
Yamaha KX76 Owner'S Manual preview
KX76
Бренд: Yamaha Страницы: 38
Yamaha HS-500 Service Manual preview
HS-500
Бренд: Yamaha Страницы: 38

Бренды по названию

Популярные бренды

Загрузить еще бренды