manualshive.com logo in svg

Korg TRITON Extreme, Руководство пользователя, Страница: 313 / 354

Поделиться
Скачать
Korg TRITON Extreme Скачать руководство пользователя страница 313

302

A

Are you sure ?

B

Battery voltage for calendar IC is low

Buffer overrun error occurred

Sampling may not be possible in some cases depending 
on the media you use. Please use the recommended 
media.

If the “Buffer overrun error occurred” error message 
appears, the data prior to the occurrence of the error 
has been recorded, but the data at the point that the 
error occurred may not play back correctly.

Buffer underrun error occurred

C

Can’t calibrate

Can’t copy/swap double size effect

Can’t open pattern

Continue ?

Completed

D

Destination and source are identical

Destination from-measure within the limits of source

Destination is empty

Destination measure is empty

Destination multisample already exists

Destination multisample and source multisample are 
identical

Destination sample already exists

Various messages

Meaning: This message asks you to confirm execution. To 

execute press the OK button. To cancel, press the 
Cancel button

.

Meaning: The calendar backup battery has run down.
Action:

Replace the battery as described in “Replacing the 
calendar backup battery” (

☞

p.319, 324).

Meaning: While sampling to the Media, the writing speed 

could not keep up with the sampling processing.

Action:

Execute the Media mode Utility page menu com-
mand “Check Medium.” If this does not solve the 
problem, copy several files from the media to 
other media, then erase those files and execute the 
operation again.

Meaning: While playing back a WAV file from the media, 

the media could not be read fast enough for play-
back processing.

Action:

Copy the desired file to another folder etc., and 
then execute once again.

Action:

Wave files on a USB device cannot be played back. 
Copy the file to media inserted in the TRITON 
Extreme’s CF card slot, and execute the operation 
again. Please use the recommended media. If this 
message appears when you attempt to play back a 
Wave file from media inserted in the CF card slot, 
copy the file to a different folder and then execute 
the operation again.

Meaning: Calibration could not be performed correctly.
Action:

Try again.

Meaning: When copying or swapping an insertion effect, 

you attempted to place a double-size effect in 
IFX1 or IFX5.

Action:

Modify your settings so that a double-size effect is 
not moved to IFX1 or 5, and execute again.

Meaning: When you finished recording or editing, it was 

not possible to allocate enough memory to open 
the pattern that was Put into the track. (When it 
must be opened automatically.) If you press the 
OK button, the pattern data will be deleted, and 
the recorded or edited content will be saved. If 
you press the Cancel button, the recorded or 
edited content will be discarded.

Meaning: Execution of the command ended normally.

Meaning: When copying or bouncing, the same cue list, 

song, track or pattern was selected for both the 
source and destination.

Action:

Select a different cue list, song, track, or pattern 
for the source and destination.

Meaning: When executing the Move Measure command for 

all tracks or within the same track, the specified 
destination measure is within the source range.

Action:

Set a destination measure that is outside of the 
source range.

Meaning: When editing, the track or pattern that was speci-

fied as the destination contains no musical data.

Action:

Select a track or pattern that contains musical 
data.

Meaning: The measure that was specified as the destination 

contains no data.

Action:

Specify a destination measure that contains data.

Meaning: A multisample already exists at the destination 

(save location) multisample.

Action:

Either delete the multisample at the destination 
(save location), or change the save destination 
multisample number.

Meaning: The same multisample is selected for the source 

and destination.

Action:

Select different multisamples for the source and 
destination.

Meaning: A sample already exists at the destination (save 

location).

Action:

Either delete the sample at the destination (save 
location), or change the save destination sample 
number.

Содержание TRITON Extreme



































































































































































































































































































































































Отзывы:

Нет отзывов