manualshive.com logo in svg

Korg TRITON Extreme, Руководство пользователя

Korg TRITON Extreme - мощный синтезатор с огромным набором звуков и возможностей. Для полного освоения инструмента важно иметь руководство пользователя. Скачайте бесплатное руководство на русском языке с manualshive.com. Узнайте все секреты работы с этим инновационным синтезатором.

Поделиться
Скачать
background image

72

2–1: MIDI Ch 1–8 

(MIDI Ch T01–08)

2–2: MIDI Ch 9–16 

(MIDI Ch T09–16)

Here you can make MIDI-related settings for each track.

2–1(2)a: Status, MIDI Channel, Bank Select

Status

[INT, Off, BTH, EXT, EX2]

This sets the status of MIDI and the internal tone generator 
for each track.

INT:

 When the musical data recorded in the track is played 

back, or when you use “Track Select” (0–1a) to select a track 
that is set to INT and play the keyboard and operate the 
controllers, the internal tone generator of the TRITON 
Extreme will sound, and MIDI data will not be transmitted 
to an external device.
Off: 

The program will not sound, nor will MIDI data be 

transmitted.
BTH:

 The operation of both INT and EXT will be per-

formed. When the musical data recorded in the track is 
played back, or when you select a track that is set to BTH 
and play the keyboard and operate the controllers, the inter-
nal tone generator of the TRITON Extreme will sound, and 
at the same time MIDI data will also be transmitted to an 
external device.
EXT:

 When the musical data recorded in the track is played 

back, or when you select a track that is set to EXT and play 
the keyboard and operate the controllers, MIDI data will be 
transmitted to an external device, but the internal tone gen-
erator of the TRITON Extreme will not sound.
When you select another song or return to the beginning of 
the song, the program change, volume, panpot, portamento, 
sends 1 and 2, post IFX pan, and post IFX sends 1 and 2 of 
each track set to EXT will be transmitted via MIDI.
EX2:

 “Bank Select (When Status=EX2)” will be enabled. 

Instead of the A–N bank numbers that can be selected on the 
TRITON Extreme, the bank number you specify here will be 
transmitted. In other respects this is the same as EXT.

MIDI data is transmitted and received on the MIDI 
channel that is specified separately for each track by 
“MIDI Channel.”

MIDI Channel

[01…16]

Specifies the MIDI channel that the track will use to transmit 
and receive musical data. The MIDI channel you specify 
here will be the receive channel when “Status” is INT, the 
transmit channel when it is EXT or EX2, and the receive/
transmit channel when it is BTH. Tracks set to INT which 
have the same MIDI channel will sound and be controlled 
identically when they receive MIDI data or data from the 
sequencer tracks.

Bank Select (When Status=EX2) [000:000...127:127]

When “Status” is set to EX2, this sets the bank number that 
will be transmitted.
The left value is the MSB, and the right value is the LSB.
When “Status” is other than EX2, this setting has no effect.

2–3: OSC 1–8 

(OSC T01–08)

2–4: OSC 9–16 

(OSC T09–16)

These parameters specify how each track will be sounded.

2–3(4)a: Force OSC Mode, OSC Select, Portamento

Force OSC Mode

[PRG, Poly, MN, LGT]

Selects the Voice Assign Mode (Program P1: 1–1b) of the pro-
gram selected for each track 1–16 (

☞

Combination P2: 2–2a).

OSC Select

[BTH, OS1, OS2]

Specifies the “Oscillator Mode” of the program selected for 
each track 1–16. If the “Oscillator Mode” is Double, you can 
use this setting to make only one or the other oscillator 
sound (

☞

Combination P2: 2–2a).

Portamento

[PRG, Off, 001...127]

Specifies the portamento effect for each track 1–16 (

☞

Com-

bination P2: 2–2a).

The portamento setting you make here will be used 
when the song is played or recorded from the begin-
ning. If you change the setting while recording, it will 
be recorded as part of the musical data. (However if 
you set this to PRG, it will not be recorded.) You can 
change this setting during playback. However if you 
come to any Portamento On/Off data or Portamento 
Time data that was recorded, the settings will change 
accordingly.
When the track whose “Status” (2–1a/2a) is INT or 
BTH

, MIDI control change CC#5 (Portamento Time) 

and CC#65 (Portamento Switch) can be received to con-
trol this and change the setting. (If the setting is PRG, 
CC#05 Portamento Time will not be received.)
When you switch songs or return to the beginning of 
the song, tracks whose “Status” is BTH, EXT, or EX2 
will transmit this setting via MIDI. If this is Off, CC#65 
with a value of 0 will be transmitted. If this is 001–127, a 

Recorded data Keyboard 
and controller operations

Received data

Status

Internal tone 
generator

MIDI OUT

Internal tone 
generator

MIDI OUT

INT

●

✕

●

—

EXT, EX2

✕

●

✕

—

BTH

●

●

●

—

Sequencer P2: Trk Param

0–1

0–1a

2–1a

LSB
MSB

0–1b
0–3a

0–1

0–1a

2–3a

0–1b
0–3a

Содержание TRITON Extreme



































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TRITON Extreme

Xtrfy K4 Series Manual preview
K4 Series
Бренд: Xtrfy Страницы: 6
Zagg Keyboard Case Instructions Manual preview
Keyboard Case
Бренд: Zagg Страницы: 20
Pyramid Imaging CAMERA LINKT CLT-351L User Manual preview
CAMERA LINKT CLT-351L
Бренд: Pyramid Imaging Страницы: 49
JWELL Jasmine Shisha Manual preview
Jasmine Shisha
Бренд: JWELL Страницы: 14
red kiwi ce4+ V3 User Manual preview
ce4+ V3
Бренд: red kiwi Страницы: 16
Deltaco TB-623 User Manual preview
TB-623
Бренд: Deltaco Страницы: 4
Microsoft Type Cover Quick Start Manual preview
Type Cover
Бренд: Microsoft Страницы: 8
Roccat VULCAN TKL Quick Installation Manual preview
VULCAN TKL
Бренд: Roccat Страницы: 12
Waeco MagicWatch MWE850 Installation And Operating Manual preview
MagicWatch MWE850
Бренд: Waeco Страницы: 200
Compex Wireless USA User Manual preview
Wireless USA
Бренд: Compex Страницы: 59
Korg Krome Manual preview
Krome
Бренд: Korg Страницы: 400
EUROPRO EUROPROPULVE V5 User Manual preview
EUROPROPULVE V5
Бренд: EUROPRO Страницы: 20
Targus AKB867 User Manual preview
AKB867
Бренд: Targus Страницы: 15
Targus AKB04US User Manual preview
AKB04US
Бренд: Targus Страницы: 8
Targus AKB864 User Manual preview
AKB864
Бренд: Targus Страницы: 15
ENHANCE GX-K1 User Manual preview
GX-K1
Бренд: ENHANCE Страницы: 7
PROLiNK PKM-3810B User Manual preview
PKM-3810B
Бренд: PROLiNK Страницы: 2
PROLiNK PCML-5307G Quick Start Manual preview
PCML-5307G
Бренд: PROLiNK Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды