manualshive.com logo in svg

Korg TRITON Extreme, Руководство пользователя

Korg TRITON Extreme - мощный синтезатор с огромным набором звуков и возможностей. Для полного освоения инструмента важно иметь руководство пользователя. Скачайте бесплатное руководство на русском языке с manualshive.com. Узнайте все секреты работы с этим инновационным синтезатором.

Поделиться
Скачать
background image

22

Br (AMS SW Break)

[–, 0, +]

Specifies the direction in which “AMS (Level Mod. AMS)” 
will affect “Break (Break Point Level).” When “Intensity 
(AMS Intensity)

” has a positive (+) value, a setting of + for 

this parameter will allow “AMS (Level Mod. AMS)” to raise 
the EG level, and a setting of – will allow “AMS (Level Mod. 
AMS)” to lower the EG level. With a setting of 0 there will be 
no change.

3–4c: Time Modulation

These settings let you use alternate modulation to control 
the Time parameters of the filter 1 EG.

AMS1:

AMS1 (Time Mod. AMS1)

[Off, (KT, EXT)]

Selects the source that will control the Time parameters of 
the filter 1 EG (“AMS List” 

☞

p.272).

Intensity (AMS1 Intensity)

[–99…+99]

Specifies the depth and direction of the effect that “AMS1 
(Time Mod. AMS1)” will have.
For example if “AMS1 (Time Mod. AMS1)” is set to Flt KTr 
+/+

, the EG Time parameters will be controlled by the Keyboard 

Track (3–2a) settings. With positive (+) values of this parame-
ter, positive (+) values of Ramp (Ramp Setting) will lengthen 
the EG times, and negative (–) values of Ramp (Ramp Setting) 
will shorten the EG times. The direction of change is specified 
by “At (AMS1 SW Attack),” “Dc (AMS1 SW Decay),” “Sl 
(AMS1 SW Slope),” and “Rl (AMS1 SW Release).”
With a setting of 0, the times specified by Filter 1 EG (3–4a) 
will be used.
If “AMS1 (Time Mod. AMS1)” is set to Velocity, positive 
(+) values

 of this parameter will cause EG times to lengthen 

as you play more strongly, and negative (–) values will 
cause EG times to shorten as you play more strongly.

At (AMS1 SW Attack)

[–, 0, +]

Specifies the direction in which “AMS1 (Time Mod. AMS1)” 
will affect the attack time. With positive (+) values of 
“Intensity (AMS1 Intensity),” setting this parameter to + 
will allow AMS1 to lengthen the time, and setting this 
parameter to – will allow AMS1 to shorten the time. With a 
setting of 0 there will be no change.

Dc (AMS1 SW Decay)

[–, 0, +]

Specifies the direction in which “AMS1 (Time Mod. AMS1)” 
will affect the decay time. With positive (+) values of 
“Intensity (AMS1 Intensity),” setting this parameter to + 
will allow AMS1 to lengthen the time, and setting this 
parameter to – will allow AMS1 to shorten the time. With a 
setting of 0 there will be no change.

Sl (AMS1 SW Slope)

[–, 0, +]

Specifies the direction in which “AMS1 (Time Mod. AMS1)” 
will affect the slope time. With positive (+) values of “Inten-
sity (AMS1 Intensity)

,” setting this parameter to + will 

allow AMS1 to lengthen the time, and setting this parameter 
to – will allow AMS1 to shorten the time. With a setting of 0 
there will be no change.

Rl (AMS1 SW Release)

[–, 0, +]

Specifies the direction in which “AMS1 (Time Mod. AMS1)” 
will affect the release time. With positive (+) values of 
“Intensity (AMS1 Intensity),” setting this parameter to + 
will allow AMS1 to lengthen the time, and setting this 
parameter to – will allow AMS1 to shorten the time. With a 
setting of 0 there will be no change.

AMS2:

AMS2 (Time Mod. AMS2)

[Off, (KT, EXT)]

Intensity (AMS2 Intensity)

[–99…+99]

At (AMS2 SW Attack)

[–, 0, +]

Dc (AMS2 SW Decay)

[–, 0, +]

Sl (AMS2 SW Slope)

[–, 0, +]

Rl (AMS2 SW Release)

[–, 0, +]

These parameters are the settings for AMS2 to control the 
Time parameters of the filter 1 EG (

☞

AMS1).

▼

 3–4: Page Menu Command

3–4A: Sync Both EGs

When you select the page menu command “Sync Both 
EGs

,” a check mark will be added at the left of “Sync Both 

EGs.” In this state, you can edit the filter 1 EG and filter 2 EG 
simultaneously. (Editing either EG will change the settings 
of both EGs.)

“Sync Both EGs” cannot separately sync the filter EG 
and amp EG. For example if they are synced in 4–3A, 
they will also be synced here.

This can be selected only if “Oscillator Mode” (1–1a) is 
Double

.

3–5: Filter2
3–6: Filter2 Mod.
3–7: Filter2 LFO Mod.
3–8: Filter2 EG 

Make settings for filter 2 which controls the sound of oscilla-
tor 2. You can choose either a 24 dB/octave low pass filter 
with resonance or a 12 dB/octave low pass filter and 12 dB/
octave high pass filter connected in series. Filter 2 can be 
used if “Oscillator Mode” (1–1a) is Double. (

☞

“3–1: 

Filter1” – “3–4: Filter1 EG”)

Filter 1 EG changes (level) (AMS = Velocity, Intensity = a positive (+) value)

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

Softly played note with “St,” 
“At,” and “Br” set to + (setting 
of 3–4a: Filter 1 EG)

Strongly played note with 
“St,” “At,” and “Br” set to +

Strongly played note with 
“St,” “At,” and “Br” set to –

Filter 1 EG changes (Time) (AMS = Velocity, Intensity = a positive (+) value)

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

Softly played note with “At,” 
“Dc,” “Sl” and “Rl” set to + 
(setting of 3–4a: Filter 1 EG)

Strongly played note with 
“At,” “Dc,” “Sl” and “Rl” set 
to +

Strongly played note with 
“At,” “Dc,” “Sl” and “Rl” set 
to –

0–1A

1–1A

1–1B

3–4A

Содержание TRITON Extreme



































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TRITON Extreme

Palm Wireless Keyboard Handbook preview
Wireless Keyboard
Бренд: Palm Страницы: 20
Califone KB4 User Manual preview
KB4
Бренд: Califone Страницы: 2
Ultrasport NavCom 400 User Manual preview
NavCom 400
Бренд: Ultrasport Страницы: 94
Ransburg A12867 Service Manual preview
A12867
Бренд: Ransburg Страницы: 118
Technics SX-KN7000EB Service Manual preview
SX-KN7000EB
Бренд: Technics Страницы: 160
M-Audio OXYGEN49 User Manual preview
OXYGEN49
Бренд: M-Audio Страницы: 80
Canon Electronic Dictionary Quick Reference preview
Electronic Dictionary
Бренд: Canon Страницы: 16
Fcar F7S series Product Manual preview
F7S series
Бренд: Fcar Страницы: 56
Tecknet X340 User Manual preview
X340
Бренд: Tecknet Страницы: 30
KAP PCM 3.1 PAS-TD Instruction Manual preview
PCM 3.1 PAS-TD
Бренд: KAP Страницы: 32
IKUSI PVTTR2400-MCX Installation Manual preview
PVTTR2400-MCX
Бренд: IKUSI Страницы: 4
Jaybird Aquafog GT-500 User'S Manual And Operating Instructions preview
Aquafog GT-500
Бренд: Jaybird Страницы: 18
Mercedes-Benz Nav+4 Operating Instructions Manual preview
Nav+4
Бренд: Mercedes-Benz Страницы: 55
G.Pulse HRM-BLE-300 User Manual preview
HRM-BLE-300
Бренд: G.Pulse Страницы: 5
Hammond SKX Reference Manual preview
SKX
Бренд: Hammond Страницы: 398
Yamaha piaggero NP-11 Reference preview
piaggero NP-11
Бренд: Yamaha Страницы: 7
iDataLink ADS-TB-TL5-EN Install Manual preview
ADS-TB-TL5-EN
Бренд: iDataLink Страницы: 10
Yamaha PortaSound PS-1 Guía Para Tocar preview
PortaSound PS-1
Бренд: Yamaha Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды