Korg TRITON Extreme Скачать руководство пользователя страница 340

Страница: 340 / 354

Appendices

329

Mac OS X users

When used with Mac OS X, the TRITON Extreme will auto-
matically use Mac OS X’s built-in MIDI driver.

For use with Mac OS X, the TRITON Extreme requires
Mac OS X 10.2 or later.

To set up the TRITON Extreme for use with Mac OS X, fol-
low the steps below.

Use a USB cable to connect the TRITON Extreme’s USB B
connector to the USB port of your computer.

Turn on the power of the TRITON Extreme.

Navigate to Macintosh HD

➝

Application folder

➝

Utility

folder, and double-click “Audio MIDI Settings.”

Click the “MIDI Devices” tab, and verify that the TRI-
TON Extreme is displayed.

About the ports of the Mac OS X default MIDI driver

Port 1 of the driver (computer) corresponds to the TRITON
Extreme’s KEYBOARD and SOUND ports.

Input port settings in your application

About the TRITON Extreme and driver
ports

KEYBOARD device

Applications on your computer use this port to receive MIDI
messages from the TRITON Extreme (data from the key-
board, controllers, and sequencer).

SOUND device

Applications on your computer use this port to send MIDI
messages to the TRITON Extreme’s internal sound genera-
tor, making it produce sound.

Name on the TRITON

Extreme

Name displayed by the application

Input

KEYBOARD

Port 1 (displayed in the MIDI input
settings)

Output

SOUND

Port 1 (displayed in the MIDI output
settings)

TRITON Extreme’s SOUND

TRITON Extreme’s KEYBOARD

Содержание TRITON Extreme



































































































































































































































































































































































Результаты поиска

Содержание TRITON Extreme

Отзывы:

Korg TRITON Extreme, Руководство пользователя, Страница: 340 / 354

Результаты поиска

Содержание TRITON Extreme

Отзывы: