manualshive.com logo in svg

Korg TRITON Extreme, Руководство пользователя

Korg TRITON Extreme - мощный синтезатор с огромным набором звуков и возможностей. Для полного освоения инструмента важно иметь руководство пользователя. Скачайте бесплатное руководство на русском языке с manualshive.com. Узнайте все секреты работы с этим инновационным синтезатором.

Поделиться
Скачать
background image

51

Combination

 P0

 P1

 P2

 P3

 P4

 P7

 P8

 P9

You can also specify the bus routing for the program used by 
each timbre 1–8.

☞

For details on insertion effects, refer to p.205 “8. Effect 
Guide.”

8–1: Routing

Specifies the bus to which the program oscillator(s) used by 
each timbre 1–8 will be sent. You can also set the send levels 
to the master effects from this page.

8–1a: Routing Map

This shows the status of the insert effects. For each insert 
effect, this indicates the routing, the name of the selected 
effect, the on/off status, and chain status.
The effect type, on/off status and chain status can be modi-
fied in the Insert FX page (8–2).

8–1b: BUS Select (IFX/Indiv.Out BUS Select),

Send1 (MFX1), Send2 (MFX2)

BUS Select (IFX/Indiv.Out BUS Select)

[DKit, L/R,

 IFX1...5, 1, 2, 3(Tube), 4(Tube),1/2, 3/4(Tube), Off]

For each timbre 1–8, these parameters specify the bus to 
which the program oscillator(s) will be sent. The current set-
tings can also be viewed in the Routing Map.

DKit: 

This can be selected only if the program for which set-

tings are being made is a drum program (“Oscillator Mode” 
Drums

). With a setting of DKit, the “BUS Select” (Global P5: 

5–2b) setting made for each key of the drum kit will be used.
For example if the “BUS Select” settings of the drum kit 
have assigned Snare sounds to IFX1 and Kick sounds to 
IFX2, setting this parameter to DKit will send the Snare 
sounds to IFX1 and Kick sounds to IFX2. If you wish to 
modify these routings, use the page menu command “Drum 
Kit IFX Patch” (8–1C).

If you want to insert Valve Force into the program oscil-
lator output of a timbre, select 3/4(Tube), 3(Tube), or 4 
(Tube)

. Set the Valve Force “Placement” (9–5a) to 

Insert

.

If this is set to 1/2 or 3/4(Tube), the programs of timbres 
1–8 will be sent in stereo from AUDIO OUTPUT (INDI-
VIDUAL) 1/2 or 3/4. If the pan of the program oscilla-
tor is controlled by MIDI control change CC#10 (pan) or 
AMS, the sound will be output with the pan setting that 
is in effect at the moment of note-on. Unlike the case 
when this parameter is set to L/R to output the sound 
from (MAIN) L/MONO and R, the pan of a sounding 
note will not change in realtime.

If you wish to move the pan of a sounding note in real-
time and output it from AUDIO OUTPUT (INDIVID-
UAL) 1/2 or 3/4, you must set “BUS Select” to IFX1 
(or IFX2–IFX5), select 000: No Effect for “IFX1” (or 
IFX2

–IFX5) (8–2), and for the sound that has passed 

through the IFX, set “BUS Select” (8–2) to either 1/2 or 
3/4(Tube)

.

Send1 (MFX1)

[000...127]

Send2 (MFX2)

[000...127]

For each timbre 1–8, these parameters set the send level to 
master effects 1 and 2. These settings are valid when “BUS 
Select

” is set to L/R or Off. When IFX 1, 2, 3, 4 or 5 are 

selected, the send levels to master effects 1 and 2 are set by 
the “Send 1” and “Send 2” parameters of the Insert FX page, 
after the sound has passed through IFX1–5.
If “BUS Select” is set to 1, 2, 3(Tube), 4(Tube), 1/2, or 3/
4(Tube)

, these settings are ignored.

Control change CC#93 can be used to control the Send 1 
level, and CC#91 to control the Send 2, and modify their 
respective settings. These messages will be received on 
the MIDI channel specified for each timbre in the P2: 
MIDI channel page.
The actual send levels are determined by multiplying 
this value with the send level “Send 1” and “Send 2” 
(Program P8: 8–1d) for each oscillator of the program 
selected for the timbre.

▼

 8–1: Page Menu Command

8–1A: Copy Insert Effect

☞

Program P8: 8–1A: Copy Insert Effect.

However, the MIDI control channel specified for “Ctrl Ch” 
of the IFX1–5 pages will not be copied.

8–1B: Swap Insert Effect

☞

Program P8: 8–1B: Swap Insert Effect.

However, the MIDI control channel specified for “Ctrl Ch” 
of the IFX1–5 pages will not be swapped.

8–1C: DrumKit IFX Patch

This command applies a patch to the “BUS Select” settings 
of each key of the drum kit, allowing you to temporarily 
change the connections to the insert effects. This command 
is available only if a drum program has been selected for the 
timbre and the “BUS Select” (8–1b) parameter is set to Dkit. 
Furthermore, this command can be executed only if the 
“BUS Select” (Global P5: 5–2b) for the individual keys of 
that drum kit are set to IFX1–5.

1

Select “DKit IFX Patch” to access the dialog box.

Combination P8: Edit–Insert FX

8–1

8–1b

8–1a

2–1a

0–1A

0–1B

8–1B

8–1C

8–1A

Содержание TRITON Extreme



































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TRITON Extreme

M-Audio Axiom AIR 25 Manual preview
Axiom AIR 25
Бренд: M-Audio Страницы: 3
Yamaha Portatone PSR-130 Manual De Usuario preview
Portatone PSR-130
Бренд: Yamaha Страницы: 22
Yamaha PortaSound PSS-595 Manual Del Usuario preview
PortaSound PSS-595
Бренд: Yamaha Страницы: 49
Yamaha PortaSound PSS-150 Owner'S Manual preview
PortaSound PSS-150
Бренд: Yamaha Страницы: 11
Yamaha PortaTone PSR-260 Owner'S Manual preview
PortaTone PSR-260
Бренд: Yamaha Страницы: 64
Yamaha Portable Grand YPG-635 Specifications preview
Portable Grand YPG-635
Бренд: Yamaha Страницы: 2
Yamaha Portable Grand TPG-535 Gebruikershandleiding preview
Portable Grand TPG-535
Бренд: Yamaha Страницы: 144
Yamaha Portable Grand DGX-202 Manuel Du Propriétaire preview
Portable Grand DGX-202
Бренд: Yamaha Страницы: 100
Yamaha PortaTone PSR-210 Manual De Instrucciones preview
PortaTone PSR-210
Бренд: Yamaha Страницы: 29
Yamaha PortaTone PSR-40 Owner'S Manual preview
PortaTone PSR-40
Бренд: Yamaha Страницы: 16
B-Speech MiniPad BK300 User Manual preview
MiniPad BK300
Бренд: B-Speech Страницы: 21
StattQualm SQuape Quick Start Manual preview
SQuape
Бренд: StattQualm Страницы: 5
Gear4music VISION KEY-10 User Manual preview
VISION KEY-10
Бренд: Gear4music Страницы: 32
Moog Micromoog 2090 Technical & Service Manual preview
Micromoog 2090
Бренд: Moog Страницы: 78
Datadesk LittleFingers Quick Start Manual preview
LittleFingers
Бренд: Datadesk Страницы: 2
Hotcig R233 User Manual preview
R233
Бренд: Hotcig Страницы: 7
Yamaha Portatone PSR-172 Service Manual preview
Portatone PSR-172
Бренд: Yamaha Страницы: 16
Yamaha PortaTone PSR-15 Owner'S Manual preview
PortaTone PSR-15
Бренд: Yamaha Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды