manualshive.com logo in svg

Korg TRITON Extreme, Руководство пользователя

Korg TRITON Extreme - мощный синтезатор с огромным набором звуков и возможностей. Для полного освоения инструмента важно иметь руководство пользователя. Скачайте бесплатное руководство на русском языке с manualshive.com. Узнайте все секреты работы с этим инновационным синтезатором.

Поделиться
Скачать
background image

182

Loading sample data

The paragraphs 22) Load .KSC, 23) Load .KMP, and 24) 
Load

 .KSF which follow explain how Korg format PCM 

data files are loaded into the sample memory (RAM) of the 
TRITON Extreme.

About the sample memory (RAM)

The TRITON Extreme is shipped from the factory with 16 
Mbytes of sample memory (RAM). (One 16 Mbyte SIMM is 
installed) By installing SIMM modules into any and all of 
the three 72 pin slots, you can expand the sample memory 
(RAM) to a maximum of 96 Mbytes (three 32 Mbyte 
SIMM’s).

It is not possible to load an individual sample that is 
larger than 16 Mbytes (mono) or 32 Mbytes (stereo). 

Limitations on the maximum number that can be loaded

• Multisamples: up to 1,000
• Samples: up to 4,000
• Samples used by multisamples: up to 4,000

About Korg format PCM data files

KSC files:

Files with an filename extension of KSC (Korg Script) con-
tain the names of .KMP and .KSF files.
When a .KSC file is loaded, the .KMP and .KSF files whose 
names it contains will also be loaded. This is a convenient 
way to load multiple multisamples and samples at once.
When saving, a .KSC file and a directory with the same 
name as the .KSC file will be created. The .KMP files and 
.KSF files listed in the .KSC file will be saved in this direc-
tory.

KMP files:

Files with a filename extension of KMP (Korg Multisample 
Parameter) contain the parameters which make up a single 
multisample. These parameters also include the filename of 
the .KSF files that are used by that multisample, so when a 
.KMP file is loaded, the necessary .KSF files will also be 
loaded at the same time.
When saving, a .KMP file and a directory with the same 
name will be created, and the .KSF files used by the multi-
sample will be saved in this directory.

KSF files:

Files with a filename extension of KSF (Korg Sample File) 
contain the parameters and waveform data which make up 
a single sample. A .KSF file can be used as one of the sam-
ples used by a multisample. A .KSF file can also be selected 
and used as a drum sample for a drum kit.

Loading multiple files

You can use wild cards to specify multiple .KMP, .KSF, .AIF, 
.WAV, AKAI Program, and AKAI Sample files, and load 
them simultaneously.

This capability can be used in 23) Load .KMP, 24) Load 
.KSF, 25) Load .AIF, 26) Load .WAV, 27) Load AKAI 
Sample File, and 28) Load AKAI Program file. (

☞

p.183)

In the Load dialog box, press the text edit button to access 
the text input dialog box.
By specifying “*” or “?” as wild cards in the selected file-
name, multiple sample files that have the same filename 
extension (same file format) and exist in the selected direc-
tory can be loaded simultaneously.

Example) 

A folder contains the following files, and you 

select “SFX_A_00.WAV” and specify wild cards to load mul-
tiple files simultaneously
PIANO.WAV, SFX_A_00.WAV, SFX_A_01.WAV, 
SFX_B_00.WAV, SFX_B_01.WAV, SFX_C_00.WAV

Select “SFX_A_00.WAV,” and choose “Load selected” to 
access the dialog box.

Press the text edit button (

) to access the text input dia-

log box, and specify the desired wildcards. (

☞

For the 

renaming procedure, refer to OG p.115)

“*” specifies the subsequent characters as a wild card.
“?” specifies only one character as a wild card.

1)

If you specify SFX_A* and execute loading, the follow-
ing files will be loaded.
SFX_A_00.WAV, SFX_A_01.WAV

2)

If you specify SFX_?_00 and execute loading, the follow-
ing files will be loaded.
SFX_A_00.WAV, SFX_B_00.WAV, SFX_C_00.WAV

3)

If you specify SFX_*_00, the result will be the same as if 
you specify “SFX_*”, and the following files will be 
loaded.
SFX_A_00.WAV, SFX_A_01.WAV, SFX_B_00.WAV,
SFX_B_01.WAV, SFX_C_00.WAV

4)

If you specify * and execute loading, all of the WAVE 
files will be loaded as follows.
PIANO.WAV, SFX_A_00.WAV, SFX_A_01.WAV, 
SFX_B_00.WAV, SFX_B_01.WAV, SFX_C_00.WAV

Содержание TRITON Extreme



































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TRITON Extreme

Jawbone UP Getting Started Manual preview
UP
Бренд: Jawbone Страницы: 3
Yamaha YPT-420 Reference Manual preview
YPT-420
Бренд: Yamaha Страницы: 5
Yamaha Electone C-405 User Manual preview
Electone C-405
Бренд: Yamaha Страницы: 5
Yamaha CBX-K1XG Mode D'Emploi preview
CBX-K1XG
Бренд: Yamaha Страницы: 72
Yamaha KB-180 Manual preview
KB-180
Бренд: Yamaha Страницы: 72
Yamaha Arius YDP-160 Owner'S Manual preview
Arius YDP-160
Бренд: Yamaha Страницы: 44
Yamaha CLAVINOVA CVP-501 Owner'S Manual preview
CLAVINOVA CVP-501
Бренд: Yamaha Страницы: 138
Yamaha Clavinova CVP-403 Basics preview
Clavinova CVP-403
Бренд: Yamaha Страницы: 4
Zagg FOLIO Manual preview
FOLIO
Бренд: Zagg Страницы: 5
Zagg FOLIO Instruction Manual preview
FOLIO
Бренд: Zagg Страницы: 13
Modecom MC-5004 User Manual preview
MC-5004
Бренд: Modecom Страницы: 14
InnoCigs EGO MEGA TWIST+ SET User Manual preview
EGO MEGA TWIST+ SET
Бренд: InnoCigs Страницы: 57
Ultrasport NavCom 400 User Manual preview
NavCom 400
Бренд: Ultrasport Страницы: 94
Microsoft Type Cover Quick Start Manual preview
Type Cover
Бренд: Microsoft Страницы: 8
M-Audio HAMMER88 User Manual preview
HAMMER88
Бренд: M-Audio Страницы: 14
4GAMING Garuda RGB User Manual preview
Garuda RGB
Бренд: 4GAMING Страницы: 21
Ceratech Accuratus KYB500-K104MUSBBLKHY Specification Sheet preview
Accuratus KYB500-K104MUSBBLKHY
Бренд: Ceratech Страницы: 1
Echomaster SSM-DIS User Manual preview
SSM-DIS
Бренд: Echomaster Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды