manualshive.com logo in svg

Korg TRITON Extreme, Руководство пользователя

Korg TRITON Extreme - мощный синтезатор с огромным набором звуков и возможностей. Для полного освоения инструмента важно иметь руководство пользователя. Скачайте бесплатное руководство на русском языке с manualshive.com. Узнайте все секреты работы с этим инновационным синтезатором.

Поделиться
Скачать
background image

306

Not enough song locations available

Not enough song memor y

O

Obey Copyright Rules

Oscillator Mode conflicts (check PROG P1)

P

Pattern conflicts with events

Pattern exists across destination to-end-of-measure or 
source from-measure

Pattern exists in destination or source track
 

Open pattern ?

Pattern used in song 

Continue ?

R

Rear sample is empty

Root directory is full

S

Sample data used in other sample(s) 

Continue ?

Sample L and R are identical

Sample length is shorter than minimum

Sample used in other multisample(s) 

Continue ?

Selected banks are the same

Meaning: When loading a .SNG file with “Append” speci-

fied, you attempted to load more songs than can 
be loaded.

Action:

In Sequencer mode, execute “Delete Song” to 
increase the number of multi’s that can be used, 
and then load the song again.

Meaning: When executing the Sampling mode “Time Slice” 

or “Save” commands, the total data for all songs 
occupies all of the sequence data memory area, so 
that saving is not possible.

Meaning: When sampling to RAM in Sequencer mode, it is 

not possible to create track data at the same time.

Action:

Increase the amount of free memory, for example 
by deleting another song.

Meaning: This will be displayed when you make settings for 

S/P DIF Input, when you execute the Media 
mode Make Audio CD page “Write to CD” com-
mand, or when you execute “Destination” in the 
Sampling mode Audio CD page “Destination” 
command. Please read “About copyright” (

☞

QS 

p.iii) before you use this data.

Meaning: In Sampling mode when you executed “Convert 

MS To Program” with Use Destination Program 
Parameters checked, the conversion destination 
program “Oscillator Mode” setting did not match.

Action:

In Program mode, set the “Oscillator Mode” of the 
conversion destination program. If converting a 
monaural multisample, select Single. If converting 
a stereo multisample, select Double.

Meaning: It was not possible to execute the Bounce opera-

tion because one of the tracks contained a pattern, 
and the same measure of the other track contained 
events or a pattern.

Action:

Open the pattern.

Meaning: When moving a measure, the edit operation could 

not be executed because a pattern had been put in 
the destination end measure or the source start 
measure, and had not been opened.

Action:

Open the pattern.

Meaning: A pattern has been placed in the track that you 

specified as a destination or source for editing. If 
you wish to open the pattern and execute (the 
events of the pattern will be copied), press the OK 
button. If you wish to execute without opening 
the pattern, press the Cancel button.

Meaning: When editing, the specified pattern has been 

placed in a track. If you wish to execute, press the 
OK button. If you decide not to execute, press the 
Cancel button.

Meaning: When you executed “Link” in the Sampling mode 

Sample Edit page, the sample that you specified 
as the rear sample is empty.

Action:

Specify a sample that contains data as the rear 
sample, and execute once again.

Meaning: You attempted to create a file or directory in the 

root directory of the media, but this would exceed 
the maximum number of root directory entries.

Action:

Either delete an existing file or directory, or Open 
a directory to move down one level before execut-
ing once again.

Meaning: Other sample(s) use the same sample data as the 

sample that you are editing. To continue editing, 
press the OK button.

Meaning: The edit operation could not be executed because 

the destination (save location) L and R sample 
numbers are identical.

Action:

Select different sample numbers for L and R of the 
destination (save location).

Meaning: You attempted to execute an editing operation 

that would make the sample data shorter than 8 
samples.

Action:

Change the editing range so that the sample data 
will be longer than 8 samples.

Meaning: The sample you are editing is used by other multi-

samples. To continue editing, press the OK but-
ton.

Meaning: This is a dialog box displayed when you load a 

TRITON Extreme .PCG file that contains drum kit 
banks C/D/User or user arpeggio banks C/D, 
and indicates that the specified loading destina-
tion bank is the same bank.

Action:

Press the OK button to acknowledge the error 
message, return to the dialog box where you spec-
ify the bank, and re-specify the loading destina-
tion bank.

Содержание TRITON Extreme



































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TRITON Extreme

VaporLinQ Next Manual preview
Next
Бренд: VaporLinQ Страницы: 19
AAMP Global ECHOMASTER PRO ParkAlert PS-TRUCK30 User Manual preview
ECHOMASTER PRO ParkAlert PS-TRUCK30
Бренд: AAMP Global Страницы: 12
Canyon CNS-HKB6 Quick Start Manual preview
CNS-HKB6
Бренд: Canyon Страницы: 10
Optimus 42-4041 Owner'S Manual preview
42-4041
Бренд: Optimus Страницы: 60
EverFocus Smart Heavy-Duty Vehicle TPMS Solution Quick Installation Manual preview
Smart Heavy-Duty Vehicle TPMS Solution
Бренд: EverFocus Страницы: 25
Yamaha AVP-007 Owner'S Manual preview
AVP-007
Бренд: Yamaha Страницы: 2
Yamaha Basics Basics preview
Basics
Бренд: Yamaha Страницы: 4
Yamaha Arius YDP-160 Quick Operation Manual preview
Arius YDP-160
Бренд: Yamaha Страницы: 2
Yamaha CE20 Owner'S Manual preview
CE20
Бренд: Yamaha Страницы: 11
Yamaha BC245XLT Owner'S Manual preview
BC245XLT
Бренд: Yamaha Страницы: 12
Yamaha 370 Installation Manual preview
370
Бренд: Yamaha Страницы: 9
Yamaha Arius YDP-C71 Owner'S Manual preview
Arius YDP-C71
Бренд: Yamaha Страницы: 38
Yamaha CBX-K3 Owner'S Manual preview
CBX-K3
Бренд: Yamaha Страницы: 47
Yamaha Arius YDP-S31 Owner'S Manual preview
Arius YDP-S31
Бренд: Yamaha Страницы: 44
Yamaha Arius YDP-140 Owner'S Manual preview
Arius YDP-140
Бренд: Yamaha Страницы: 44
Yamaha ARIUS YDP-145 Owner'S Manual preview
ARIUS YDP-145
Бренд: Yamaha Страницы: 48
Yamaha CBX-K1XG Owner'S Manual preview
CBX-K1XG
Бренд: Yamaha Страницы: 72
Yamaha 503 Owner'S Manual preview
503
Бренд: Yamaha Страницы: 138

Бренды по названию

Популярные бренды

Загрузить еще бренды