Kontron TIGW1U, Руководство по эксплуатации продукта, Страница: 34 / 104

TIGW1U server—Server Installations and Upgrades
Kontron Carrier Grade Server TIGW1U
Product Guide, rev. 1.3 December 2009
34
Regardless of the processor model you install, you must use BIOS version R0085 or
later with any server that has one of the above product codes:
Caution: If your server has one of the above product codes, then configuring it with a BIOS
version lower than R0085 will cause system instabilities and your system may not boot.
3.4.2 Configuring Memory DIMMs
The S5000PHB server board server board supports up to six DDR2-533 or DDR2-667
Fully Buffered DIMMs (FBD memory) in six DIMM slots across two channels, Channel 0
and Channel 1.
Channel 0 consists of DIMM sockets A1, A2, and A3. Channel 1 consists of DIMM
sockets B1, B2, and B3. See Figure 18 .
CPU CPU
J3E2
1 2 3
1 2 3
for Dual-Core Intel
®
Xeon ® Processor
5100 Series:
for Quad-Core Intel
®
Xeon
®
Processor
5400 Series:
NO jumper
installed.
Install jumper
over pins 1-2.
CAUTION: Jumper J3E2 must be
configured to match your installed
processor or your system will not boot
properly.
Server
Board
Figure 18. DIMM Slots and Channels
Channel 1
Channel 0
DIMM Soc
kets
DIMM A1
DIMM A2
DIMM B3
DIMM B2
DIMM A3 DIMM B1
AF000879