Kontron FlexPAC, Руководство пользователя

Страница: 61 / 137

Boot Up Floppy Seek
This option determines whether the BIOS checks for a floppy drive while
booting up. If it does not detect one (either due to improper configuration or
its absence), it will flash an error message.
Boot Up NumLock Status
This option allows you to activate the NumLock function after you power up
the system.
Gate A20 Option
This option determines how gate A20 is handled. Gate A20 is a device used
to address memory above 1MB. Initially, Gate A20 was handled through a
pin on the keyboard. Today, while keyboards still provide this support, it is
more common and much faster, for the system chipset to provide support for
Gate A20.
Typematic Rate Setting
When this option is disabled, holding down a key on your keyboard will
generate only one key stroke at a time. When enabled, you can set the next
two listed typematic control options.
Typematic Rate (Characters Per Second)
When this option is enabled, the system registers repeated keystroke speeds.
You can select the speed range from 6 to 30 characters per second.
Typematic Delay (Msec)
When the “Typematic Rate” option has been enabled, this option will allow
you to set the time interval for displaying the first and second characters.
3
■
Configuration
3.13