manualshive.com logo in svg

Kontron FlexPAC, Руководство пользователя

Поделиться
Скачать
Kontron FlexPAC Скачать руководство пользователя страница 40

Driver for USB 2.0

Please use Microsoft Windows Update to download the USB 2.0 driver.

Drivers Installation

The drivers for the FlexPAC are provided on the “Drivers/User Manual” CD 
included with your system. This section provides driver installation 
procedures for Windows 2000/XP and Windows NT 4.0 operating 
systems. Some drivers contain “Readme.txt” files. These files include  
updates, changes or information relating to the drivers you are about to 
install. Read the “Readme.txt” files before loading drivers.

Intel Chipset Software Installation Utility

The Intel Chipset Software Utility enables “Plug and Play” INF support for  
Intel chipset components. Use the following procedures to install the 
drivers for Windows 2000/XP.

1. Power “On” the FlexPAC. Insert the CD that comes with the CPU card.   
A screen appears. Click Intel Chipsets and then click Intel 845G Drivers.

2. Click Intel Chipset Software Installation Utility.

3. When the Welcome screen appears, click Next.

4. Click Yes to accept the software license agreement and proceed with 
installation.

5. In the Readme Information screen, click Next to continue.

6. Setup is complete. Click Finish to restart the computer to allow changes to 

take effect. When the computer restarts, the system will find devices. 
Restart your computer when prompted. 

2 

■ 

System Description

2.2

Содержание FlexPAC










































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды