manualshive.com logo in svg

Kontron FlexPAC, Руководство пользователя

Поделиться
Скачать
Kontron FlexPAC Скачать руководство пользователя страница 2

 

 

About this Product  

The FlexPAC Portable Add-In Computer is sold by Kontron America’s Mobile Rugged 

Division (formerly Dolch Computer Systems.) 

About This Manual 

This document provides information about the FlexPAC Portable Add-In Computer. 

No warranty of suitability, purpose, or fitness is implied. While every attempt has 
been made to ensure that the information in this document is accurate, the 
information contained within is supplied “as-is” and can change without notice. 

Trademarks 

FlexPAC is a trademark of Kontron America’s Mobile Rugged Division. All other 

product names are trademarks or registered trademarks of their respective holders. 

Copyright Notice 

Copyright © 200

6 

Kontron America Mobile Rugged Division. 

All rights reserved. No part of this manual may be reproduced, transmitted, 
transcribed, stored in a retrieval system, or translated into any language or 
computer language, in any form or by any means (electronic, mechanical, 

photocopying, recording, or otherwise), without the written permission of Kontron 
America Mobile Rugged Division. 

Standards 

Kontron America is certified to 

ISO 9001:2000 & AS9100:2004 standards

.  

Содержание FlexPAC










































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды