manualshive.com logo in svg

Kontron FlexPAC, Руководство пользователя

Поделиться
Скачать
Kontron FlexPAC Скачать руководство пользователя страница 105

Cleaning the FlexPAC

Use the following procedure to clean the FlexPAC.

CAUTION: Before cleaning the FlexPAC, make sure the power is “Off”

and the power cord is disconnected, otherwise, you may
damage the unit or cause injury to yourself.

• Wipe dust and fingerprints off the outside casing using a cloth slightly

moistened with water or a mild ammonia-based cleaning solution.

• After cleaning the FlexPAC, make sure the unit is completely dry before

powering the system back “On.”

Cleaning the Flat-Panel Display

Use the following procedure to clean the flat-panel display.

• Wipe the flat-panel display with an absorbent cotton cloth or other soft

cloth. Do not use any liquid cleaner on the display.

• Use care when cleaning the flat-panel display. The flat-panel display is

glass and can crack or break if the unit is dropped.

• Be careful not to scratch the glass on the flat-panel display. Keep all sharp

objects away from the display.

WARNING: Do not let any liquid come in contact with the flat-panel

display, as it may cause discoloration or spots.

6 

■

Maintenance & Troubleshooting

6.4

Содержание FlexPAC










































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды