Kontron FlexPAC, Руководство пользователя

Страница: 117 / 137

Keyboard Controller Failure
The keyboard failed the self-test command. Check to see if the keyboard is
correctly plugged in. If the problem continues, and you have access to another
FlexPAC keyboard, try an alternative.
Keyboard Failure
The keyboard failed to respond to the RESET ID command.Check to see if the
keyboard is correctly plugged in. If the problem continues, and you have access
to another FlexPAC keyboard, try an alternative.
No Bootable Floppy Drive 0 Installed
No bootable floppy drive was detected. Possible solutions:
(1) Power down the system and check all appropriate connections, cables, etc.
(2) In configurations where no floppy drive is installed, run the SCU (System
Configuration Utility) and make sure the disk drive configuration option is set
to “None.”
(3) Replace the disk drive, if necessary.
No Interrupts from Timer 0
The periodic timer interrupt is not occurring.
RAM Parity Error at Location xxxx
A RAM parity error occurred at the specified (hexa-decimal) location.
6
■
Maintenance & Troubleshooting
6.16