manualshive.com logo in svg

Kontron FlexPAC, Руководство пользователя

Поделиться
Скачать
Kontron FlexPAC Скачать руководство пользователя страница 20

13. Removable Hard Disk Drive - The FlexPAC can be equipped with an

optional removable hard disk drive.

14. Corner Bumpers - Four shock absorbing corner bumpers provide added

protection during transport of the portable FlexPAC.

15. Power Switch/Power Receptacle - The “On/Off” power switch and the

power cord receptacle are located on the side panel to the right of the
display.

16. Carrying Handle - A convenient carrying handle for easy transport and

handling is provided on the FlexPAC.

17. Cover Grill - Remove the fan filter cover to access the washable

air filter.

18. PCMCIA/CardBus Slot - The FlexPAC can be equipped with an

optional PCMCIA/CardBus slot that accepts either two type II or one
type III PC cards.

19. CD-ROM - The FlexPAC comes standard with a multi-speed super slim

CD-ROM or an optional CD-RW.

20. Floppy Disk Drive - A 1.44MB, 3.5 inch floppy disk drive is standard

on the FlexPAC.

1 

■

Getting Started

1.7

Содержание FlexPAC










































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды