Kontron FlexPAC, Руководство пользователя

Страница: 116 / 137

Warning Messages
Clock Not Ticking Correctly
The real time clock is not ticking.
CMOS Checksum Invalid - Run SCU
CMOS RAM information has been corrupted and needs to be re-initialized
via the System Configuration Utility (SCU).
6
■
Maintenance & Troubleshooting
6.15
Hardware Info Does Not Match Video Card - Run SCU
The video adapter type specified in CMOS RAM doesn’t match the installed
hardware.
Hard Disk Controller Error
The hard disk controller failed to respond to the reset command.
Possible solutions:
(1) Check the drive parameters.
(2) Power down the system and check all of the appropriate connections. If the
problem persists, the hard disk controller or the hard disk may need to be
replaced.
Floppy Information Invalid - Run SCU
The drive parameters stored in the CMOS do no match with the floppy disk
drive’s parameters detected in the system. Changes may be required in the
CMOS Setup.
Floppy Controller Failed
The floppy controller failed to respond to the reset command. Power down the
system and check all of the appropriate connections. If the floppy controller
continues to fail, it may need to be replaced.
Floppy Controller Failed
The floppy controller failed to respond to the reset command. Power down the
system and check all of the appropriate connections. If the floppy controller
continues to fail, it may need to be replaced.