Kontron FlexPAC Скачать руководство пользователя страница 41

Страница: 41 / 137

Intel Application Accelerator

Use the following installation procedure to install the “Intel
Application Accelerator” driver using the Install Shield Wizard under
Windows 2000/XP and Windows NT 4.0.

1. Power “On” the FlexPAC. Insert the CD that comes with the CPU

card into the CD-ROM.

2. Click the Intel Application Accelerator. The Welcome screen of the

Install Shield Wizard for the accelerator appears. Click yes to accept
the software license agreement and proceed with installation.

3. Select the folder in which the Setup will install files. Click Next to accept
the default folder, or click Browse to choose a different location.

4. Select a Program folder. Click Next to accept the default program folder or
enter a folder name you prefer.

5. The Install Shield Wizard has completed the installation. Remove the CD.

Click Finish to restart the system for changes to take effect.

■

System Description

2.3

Содержание FlexPAC










































































































































Результаты поиска

Содержание FlexPAC

Отзывы:

Бренды по названию

Популярные бренды

Kontron FlexPAC, Руководство пользователя

Результаты поиска

Содержание FlexPAC

Отзывы:

Бренды по названию

Популярные бренды