manualshive.com logo in svg

Kontron FlexPAC, Руководство пользователя

Поделиться
Скачать
Kontron FlexPAC Скачать руководство пользователя страница 42

Windows NT 4.0 Drivers

The following drivers are for Windows NT 4.0 operating systems only.
Windows NT 4.0 must be loaded on your system before attempting the
installation of these drivers.

Installing Windows NT 4.0 VGA Drivers

Use the following procedure to install the “ATI Mobility Radeon M6”
graphics driver in the Windows NT 4.0 environment. It is recommended that
you make a backup copy of the “ATI Mobility Radeon M6” VGA drivers for
safekeeping.

1. Power “On” the FlexPAC. Insert the supplied “Drivers/User Manual” CD

into the CD-ROM.

2. An “Inside this CD” window will appear. Click on the VGA Card icon on

the left side of the window.

3. Then click on ATI Mobility Radeon VGA Driver on the right

side of the window.

4. When the “Welcome” window appears, click on Next to continue.

5. Click on Yes to accept the software license agreement and proceed with

the installation process.

6. In the “Select Components” window, click on the Express Recommended

installation method, then click on Yes to start the file copying process.

7. The Setup process is now complete. Remove the CD. Click on Finish to

restart the system for the changes to take effect.

2 

■

System Description

2.4

Содержание FlexPAC










































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды