Kontron FlexPAC, Руководство пользователя

Страница: 113 / 137

POST Test Codes
Description Test Point
Initial L1, L2 Cache, Make Stack and Diagnose CMOS 10H
Turn Off FAST A20 for POST. Reset GDT’s 8259s Quickly 11H
Signal Power-On Reset at CMOS 12H
Initialize the Chipset (SDRAM) 13H
Search for ISA Bus VGA Adapter 14H
Reset Counter/Timer 1, Exit RAM 15H
User Register Configuration Through CMOS 16H
Dispatch to 1st 64K RAM Test 18H
Checksum the ROM 19H
Reset PICs (8259s) 1AH
Initialize Video Adapter(s) 1BH
Initialize Video (6845 Regs) 1CH
Initialize Color Adapter 1DH
Initialize Monochrome Adapter 1EH
Test 8237A Page Registers 1FH
Perform Keyboard Self Test 20H
Test and Initialize Keyboard Controller 21H
Check if CMOS RAM is Valid 22H
Test Battery Fail and CMOS X-SUM 23H
Test the DMA Controllers 24H
Initialize 8237A Controller 25H
Initialize Interrupt Vectors Table 26H
RAM Quick Sizing 27H
Protected Mode Entered Safely 28H
RAM Test Completed 29H
Protected Mode, Exit Successful 2AH
Setup Shadow 2BH
Prepare to Initialize Video 2CH
Search for Monochrome Adapter 2DH
Search for Color Adapter, VGA Initialize 2EH
Sign-On Messages Displayed 2FH
Special Initialize of Keyboard Controller 30H
Test if Keyboard Present 31H
Test Keyboard Interrupt 32H
6
■
Maintenance & Troubleshooting
6.12