Kontron CP6500-V, Руководство пользователя

Страница: 64 / 192

Functional Description CP6500-V
Page 2 - 30 © 2005 Kontron Modular Computers GmbH ID 28945, Rev. 01
P R E L I M I N A R Y
2894
5.01.UG.VC.050304/09095
2
Table 2-20: 64-bit CompactPCI Bus Connector J2 Peripheral Slot Pinout
PIN ROW Z ROW A ROW B ROW C ROW D ROW E ROW F
22 GND GA4 GA3 GA2 GA1 GA0 GND
21 GND CLK6 GND NC NC NC GND
20 GND CLK5 GND NC GND NC GND
19 GND GND GND NC NC NC GND
18 GND NC NC NC GND NC GND
17 GND NC GND PRST# REQ6# GNT6# GND
16 GND NC NC DEG# GND NC GND
15 GND NC GND FAL# REQ5# GNT5# GND
14 GND * * * GND * GND
13 GND * GND V(I/O) * * GND
12 GND * * * GND * GND
11 GND * GND V(I/O) * * GND
10 GND * * * GND * GND
9 GND * GND V(I/O) * * GND
8 GND * * * GND * GND
7 GND * GND V(I/O) * * GND
6 GND * * * GND * GND
5 GND * GND V(I/O) * * GND
4 GND V(I/O) NC * GND * GND
3 GND CLK4 GND GNT3# REQ4# GNT4# GND
2 GND CLK2 CLK3 SYSEN# GNT2# REQ3# GND
1 GND CLK1 GND REQ1# GNT1# REQ2# GND
Note ...
A * indicates that the signal normally present at this pin is disconnected from the
CompactPCI bus when the CP6500-V is inserted in a peripheral slot.
Warning!
The pins marked with a * are connected to the voltage source on the CPU via a
pull-up resistor, and are not suitable for general use. These pins must not be con-
nected. Please contact Kontron Modular Computers’ Technical Support for infor-
mation on using these pins.
Failure to comply with the above may result in damage to your board.