Kontron CP6500-V, Руководство пользователя

Страница: 112 / 192

Power Consumption CP6500-V
Page 6 - 8 © 2005 Kontron Modular Computers GmbH ID 28945, Rev. 01
P R E L I M I N A R Y
2894
5.01.UG.VC.050304/09095
5
The Power Consumption using Windows® 2000 at 100% CPU Usage was measured at a VGA
resolution of 1024X768.
6.2.2 Power Consumption of CP6500-V Accessories
The following table indicates the power consumption of the CP6500-V accessories.
6.2.3 Power Requirement for the CP6500-V
The following table indicates the start-up current of the CP6500-V during the first 2-3 seconds
after the power supply has been switched on. The power consumption of the CP6500-V during
operation is indicated in tables 6-4 to 6-7.
For further information on the start-up current, contact Kontron Modular Computers’ Technical
Support.
Table 6-6: Power Consumption: Windows® 2000 100% CPU Usage
POWER
CELERON
400 MHz
256 MB
CELERON
1.0 GHz
256 MB
Core 0.95 V 1.145 V
5 V 4.75 W 10.98 W
3.3 V 7.49 W 7.59 W
Total 12.24 W 18.57 W
Warning!
During power-up, the 3.3 V input power supply must be able to provide a mini-
mum peak current of approximately 10 A to the CP6500-V. This applies for
each CP6500-V in a given system.
Failure to comply with the above warning may result in damage to or improper
operation of the CP6500-V.
Table 6-7: Power Consumption Table for CP6500-V Accessories
MODULE POWER 5 V POWER 3.3 V average
SDRAM SODIMM PC133 — 0.5 W - 1.5 W
CompactFlash 100 mW - 300 mW —
Table 6-8: Start-Up Current of the CP6500-V
POWER
CELERON
400 MHz
256 MB
CELERON
1.0 GHz
256 MB
5 V peak 8.5 A 4.0 A
average 1.0 A 1.2 A
3.3 V peak 9.0 A 6.0 A
average 2.5 A 2.8 A
12 V average 0.1 A 0.1 A