Kontron CP3010-SA, Руководство пользователя

Страница: 42 / 80

D R A F T — F O R I N
T E R N A L U S E O N L Y
42 www.kontron.com
User Guide
CP3010-SA
3.3.1 Write Protection Register (WPROT)
The Write Protection Register holds the write protect signals for non-volatile devices.
Table 26: Write Protection Register (WPROT)
ADDRESS 0x284
BIT 7 6 5 4 3 2 1 0
NAME SWP Reserved
SFWP DSWP
BSWP SSWP
ACCESS
R
R R/W R R R/W
RESET 0 000 0 0 0 0
BITFIELD DESCRIPTION
7 SWP System write protection status:
0 = Onboard non-volatile memory devices not write protected
1 = Onboard non-volatile memory devices write protected
3 SFWP SATA Flash write protection status:
0 = SATA Flash / CFast memory not included in system write protection
1 = SATA Flash / CFast memory included in system write protection
If this bit is programmed once, it cannot be reprorammed.
2 DSWP This bit reflects the state of the system write protection via DIP switch SW1, switch 3:
0 = System not write protected via DIP switch
1 = System write protected
1 BSWP This bit reflects the state of the system write protection via backplane (SYS_WP#):
0 = System not write protected via backplane
1 = System write protected
0 SSWP This bit reflects the state of the system write protection via software:
0 = System devices not write protected via software
1 = System write protected
If this bit is programmed once, it cannot be reprogrammed.