D R A F T — F O R I N
T E R N A L U S E O N L Y
69
www.kontron.com
User Guide
CP3010-SA
9 uEFI BIOS
9.1 Star ting the uEFI BIOS Setup Program
The CP3010-SA is provided with a Kontron-customized, pre-installed and configured version of Secu-
reCore Tiano™ (referred to as uEFI BIOS in this manual), Phoenix BIOS firmware based on the Unified
Extensible Firmware Interface (uEFI) specification and the Intel® Platform Innovation Framework for
EFI. This uEFI BIOS provides a variety of new and enhanced functions specifically tailored to the hard-
ware features of the CP3010-SA.
The uEFI BIOS comes with a Setup program which provides quick and easy access to the individual func-
tion settings for control or modification of the uEFI BIOS configuration. The Setup program allows the
accessing of various menus which provide functions or access to sub-menus with more specific func-
tions of their own.
To start the uEFI BIOS Setup program, follow the steps below:
1.
Power on the board.
2.
Wait until the first characters appear on the screen (POST messages or splash screen).
3.
Press the <F2> key.
4.
If the uEFI BIOS is password-protected, a request for password will appear.
Enter either the User Password or the Supervisor Password (see Security menu), press <RE-
TURN>, and proceed with step 5.
5.
A Setup menu will appear.
To launch the uEFI BIOS Boot Menu, follow the steps below:
1.
Power on the board.
2.
Wait until the first characters appear on the screen (POST messages or splash screen).
3.
Press the <F5> key.
4.
The uEFI BIOS Boot Menu will appear.
The CP3010-SA uEFI BIOS Setup program uses a hot key-based navigation system. A hot key legend bar
is located on the bottom of the Setup screens. The following table provides information concerning the
usage of these hot keys.
Table 46: Navigation
HOT KEY
DESCRIPTION
<F1>
The <F1> key is used to invoke the General Help window.
<F5> or <->
The <F5> key or the <Minus> key is used to select the next lower value within a field.
<F6> or <+> The <F6> key or the <Plus> key is used to select the next higher value within a field.
<F9>
The <F9> key is used to load the standard default values.
<F10>
The <F10> key is used to save the current settings and exit the uEFI BIOS Setup.
<
>
<
>
The <Left/Right> arrows are used to select major Setup menus on the menu bar.
For example: Main screen, Advanced screen, Security screen, etc.
<
>
<
>
The <Up/Down> arrows are used to select fields in current menu, for example, a Setup function or a sub-screen.
<ESC>
The <ESC> key is used to exit a major Setup menu and enter the Exit Setup menu.
Pressing the <ESC> key in a sub-menu causes the next higher menu level to be displayed.
<RETURN>
The <RETURN> key is used to execute a command or select a submenu.