Konica Minolta FK-116, Руководство пользователя

Страница: 62 / 216

Basic FAX Operations
2-29
7 OT-DIAL IN COPY
*DISABLE ENABLE
, & YES
2. Press "3" from the Numeric keys. The following
message appears briefly to confirm your
selection.
3. Press or key to select Disable or
Enable as the default setting, then press the
Yes key.
4. Press the No/Clear key to restore the initial state.
Settings of RX Operation
NOTE : Some settings of the RX operation is mentioned in other chapter shown as
below:
REDUCTION RX ………..
í
P 2-18
MAILBOX RX ……………
í
P 4-15
RX MODE………………...
í
P 2-19
Setting MEMORY RX MODE
Memory RX Mode stores in memory the contents of a received document. The
document is not printed unless the machine receives a print out command. This feature
provides a means of controlling the documents received through fax. The print
command may be a timer or password.
The print timer command prompts the machine to start printing the document stored in
memory at the specified time. The password print command prompts the machine to
start printing when a password is input.
A print timer command can be used in combination with a password print command.
When a print timer command has been defined and you want a printout to occur before
the set time, you can enter the password to activate the earlier printout provided a
password print command has also been set.
Programming for Memory RX Mode
1. Press the Utility key 5 times.
Utility
x 5
No
C
3
DEF
Yes