manualshive.com logo in svg

Konica Minolta FK-116, Руководство пользователя

Поделиться
Скачать
Konica Minolta FK-116 Скачать руководство пользователя страница 134

Enhanced Utility Functions

5-19

-SELECT REGIST. KEY-

NOTE:

Registering a Group Dial into a One-Touch key in which One Touch Dial or
Program Dial or another Group Dial has previously been assigned overwrites the
original data.

REGISTERED !          KEEP ?

  OK=YES    (EDIT/DEL=NO)

DIAL REGISTRATION?

   OK=YES / or 1-5

3.GROUP DIAL

4.

 

Press the Yes key.
The “One Touch List” or “Speed Dial List” will print.

Check that the contents of the registered destinations are shown correctly on LIST.

Group Dial

Destinations registered for One Touch Dial, Speed Dial, and Phone Book can be
registered as a Group in a Group Dial key. Up to 27 Groups can be registered. Each
Group can contain up to 50 destinations. For this registration, Combination Dial can be
used.

If you frequently send the same document to multiple destinations, register these
destinations in a Group Dial to enable transmission to the entire Group using a single
key.

All of the One-Touch keys can be used for Group Dial.

Register the Group Dial

1.

 

Press the Utility key 3 times.

The display shows the message "DIAL
REGISTRATION?”

2.

 

 Press ‘3’ from the Numeric keys.

3.

 

Press the desired One-Touch key in which
you want to register the group.
For example: Using One Touch key 17

If a Group has already been registered for
the One Touch key, the following display is
shown.

Utility

x 3

3

DEF

Yes

Содержание FK-116

























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды