manualshive.com logo in svg

Konica Minolta FK-116, Руководство пользователя

Поделиться
Скачать
Konica Minolta FK-116 Скачать руководство пользователя страница 201

Troubleshooting

9-5

*CAUTION!*

TONER EMPTY

Symptom

Possible cause

What to do

The original document has
not been set properly .

§

 

Set the scale of the

original document
properly.

§

 

Adjust the document

guide plates properly
when the original
document is placed into
the Automatic
Document Feeder.

The copy appears uneven
or at a tilt.

There is an obstruction on
the original glass (when
using the Automatic
Document Feeder).

§

 

Remove the obstruction

and wipe the original
glass clean with a soft
cloth.

How to replace the supply unit

When the following message appears:

NOTE:

Be careful not to touch the marked areas

 CAUTION: HOT  with bare hands.

1.

 

Pull the Lock Release Lever and fold open

the Upper Half of Machine.

2.

 

Remove the supply unit.

NOTE:

The metal parts within the machine are hot. To

avoid injury, do not put your hands in direct

contact with the metal fittings inside the machine.

Содержание FK-116

























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды