Konica Minolta bizhub C200, Руководство пользователя

Страница: 262 / 268

C200 12-4
Appendix
12
12.2 Glossary
The words used in Copy mode are described below.
Numeric
2nd Side
Select this setting to switch the image transfer current of this machine when copying on paper that has
already been printed on one side.
Abbreviation
ADF
Reverse automatic document feeder; Can be used to automatically scan the original
A
AE Level Adjustment
Set this parameter to adjust the background of the original. The higher the setting, the more that the original
background is emphasized. (AE = Auto exposure)
ATS
Automatic paper-tray-switching feature (ATS = Auto Tray Switch)
Auto Zoom
Select this setting to automatically select the appropriate zoom ratio after an original is placed on the original
glass or loaded into the ADF and the paper size is selected.
Auto Paper
Select this setting to detect the original placed on the original glass or loaded into the ADF, then automatically
select paper of the same size if "×1.000" is selected or select the paper size appropriate for the specified
zoom ratio.
B
Background Adjust
Select a setting to adjust the density of the background color of the original to one of nine levels.
Blue
Set this parameter to adjust the level of blue in the image, for example, if you wish to emphasize the blue of
water or the sky.
Brightness
Set this parameter to make the image either lighter or darker.
C
Change Tray Settings
Touch this button to specify a paper size not loaded in a paper tray or to copy on paper other than normal
paper.
Color Adjustment
Set these parameters to adjust the quality of color copies.
Color Balance
Set this parameter to adjust the balance in the concentrations of cyan (C), magenta (M), yellow (Y) and black
(K). Each color can be finely adjusted to any of 19 levels between –3 and +3.
Combine Originals
Select a setting to arrange reduced copies of multiple original pages on a single copy page. The settings for
the number of pages that can be combined are "2in1" and "4in1".
Contrast
Set this parameter to adjust the contrast between light and dark.
Copy Density
Set this parameter to finely adjust the copy density to any of 19 levels between –3 and +3.
D
Density
Select a setting to adjust the density of the print image to one of nine levels.