Konica Minolta bizhub C200, Руководство пользователя

Страница: 243 / 268

C200 11-24
Utility mode
11
– If the lines are shifted in the X direction as shown
below, touch
under "X" to reduce the
adjustment.
– Each time or is touched, the value is
increased or decreased by one increment.
– A range between -6 dots and 6 dots is available for
setting.
– An adjustment of 1 dot moves the cyan lines along the
X and Y directions of the test pattern 0.042 mm from
their previous position.
– Touch [Restore] to return the adjustment value to the
previous setting.
– If the lines are shifted in the X direction as shown
below, touch
under "X" to increase the
adjustment.
– If the lines are shifted in the Y direction as shown
below, touch [Y] and then, touch
under "Y" to
reduce the adjustment.
– If the lines are shifted in the Y direction as shown
below, touch [Y] and then, touch
under "Y" to
increase the adjustment.
– If the lines are not shifted from the reference lines, continue with step 10.
9
Press the [Start] key.
– The adjustment is applied when the [Start] key is pressed. To cancel the adjustment, press the
[Reset] key instead of pressing the [Start] key.
The adjusted test pattern is printed.
10
Check the print result.
– If there is no shift between the black and cyan lines, continue with step 11.
– If more adjustment is necessary, repeat steps 8 and 9.