Komatsu PW160-7K Series, Руководство по эксплуатации и обслуживанию

Страница: 31 / 358

SAFETY PRECAUTION DURING OPERATION
31
WARNING: Failure to follow these safety precautions may lead to a serious accident.
CHECK THAT NO ONE IS IN THE AREA BEFORE SWINGING
OR TRAVELLING IN REVERSE
●
Always position a signalman when operating in dangerous
places or places where the view is not clear.
●
Make sure that no one comes inside the swing radius or
direction of travel.
●
Before starting to move, sound the horn or give a signal to
warn people not to come close to the machine.
●
There are blind spots behind the machine, so if necessary,
swing the upper structure to check that there is no one behind
the machine before travelling in reverse.
PRECAUTIONS WHEN TRAVELLING
●
Fold in the work equipment as shown in the diagram, and
keep it at a height of 40-50 cm from the ground level before
starting to travel.
●
Before travelling on public roads, fully raise dozer blade and
outriggers, lock the outriggers in position with the safety pin,
lock the bucket and arm cylinder with isolation valves, and
insert swing lock pin.
For details, see "TRAVELLING ON PUBLIC HIGHWAY
(175)"
●
When travelling on public roads the safety lock lever should
be down (UNLOCKED) and lock lever switch engaged. This
prevents operation of the control levers and activates the rear
facing brake lamp circuit.
●
When travelling on rough ground, travel at low speed, and
avoid sudden changes in direction.
●
Avoid travelling over obstacles as far as possible. If the
machine has to travel over an obstacle, keep the work equip-
ment as close to the ground as possible and travel at low
speed. Never travel over obstacles which make the machine
tilt strongly (10° or more).
40 - 50cm
INCORRECT